P0790

What does P0790 mean?

P-code P0790 means "Shift/Timing Solenoid Range/Performance". It is a generic OBD-II diagnostic trouble code (DTC) in the transmission. The shift/timing solenoid range/performance is operating outside its expected performance range, suggesting a mechanical or electrical issue. This code can be monitored, but service is recommended to prevent escalation. This code applies to OBD-II compliant electric and hybrid vehicles.

Possible Causes

• Sensor output is electrically valid but mechanically out of expected range
• Mechanical wear or damage in the monitored component
• Contamination (fluid, dirt, or debris) affecting sensor accuracy
• Intermittent electrical connection causing fluctuating readings

Recommended Actions

1. 1 Note the alert and schedule a diagnostic appointment when convenient
2. 2 Scan for all DTCs with an OBD-II scanner — note any related codes stored alongside P0790
3. 3 Inspect the transmission component and its wiring for visible damage
4. 4 Check for water intrusion in connector areas and clean contacts if corroded
5. 5 Clear the DTC, road-test the vehicle, and re-scan to confirm whether the fault returns
6. 6 If the fault persists after inspection and clearing, consult an EV-certified technician for component replacement

Related Transmission fault codes