P1216

What does P1216 mean?

P-code P1216 means "Injector Control Pressure Sensor Above / Below Desired". It is a manufacturer-specific diagnostic trouble code (DTC) in the fuel system. The pressure reading from the injector control pressure sensor above / below desired is outside the expected operating range. This warning should be addressed within the next few days to avoid further damage. This code applies to OBD-II compliant electric and hybrid vehicles.

Possible Causes

• Faulty pressure sensor or damaged sensor connector
• Fluid leak causing lower-than-expected pressure readings
• Blocked pressure port or contaminated sensing element
• Pump or actuator failure affecting system pressure

Recommended Actions

1. 1 Avoid aggressive driving and schedule a diagnostic appointment within the next 1–3 days
2. 2 Scan for all DTCs with an OBD-II scanner — note any related codes stored alongside P1216
3. 3 Inspect the fuel system component and its wiring for visible damage
4. 4 Check for water intrusion in connector areas and clean contacts if corroded
5. 5 Clear the DTC, road-test the vehicle, and re-scan to confirm whether the fault returns
6. 6 If the fault persists after inspection and clearing, consult an EV-certified technician for component replacement

Related Fuel fault codes