P1307

Warning

Boost Calibration Low

Severity
Warning
Category
Powertrain
Code Type
Manufacturer Specific
Applicable Regions
US, EU, Global

Is it safe to drive?

🟡 Check the vehicle display for drive or charge restrictions and schedule service promptly.

What does P1307 mean?

P-code P1307 means "Boost Calibration Low". It is a manufacturer-specific diagnostic trouble code (DTC) in the powertrain. A calibration or relearn procedure is required for the boost calibration low before normal operation can resume. This warning should be addressed within the next few days to avoid further damage. This code applies to OBD-II compliant electric and hybrid vehicles.

Possible Causes

  • Component replacement without performing the required calibration procedure
  • Battery disconnect or power interruption cleared calibration data
  • Software update changed calibration parameters
  • Mechanical adjustment required after part replacement or repair

Recommended Actions

  1. 1 Avoid aggressive driving and schedule a diagnostic appointment within the next 1–3 days
  2. 2 Scan for all DTCs with an OBD-II scanner — note any related codes stored alongside P1307
  3. 3 Perform the required calibration or relearn procedure using a compatible scan tool
  4. 4 Follow the manufacturer's specific calibration sequence for this component
  5. 5 Clear the DTC, road-test the vehicle, and re-scan to confirm whether the fault returns
  6. 6 If the fault persists after inspection and clearing, consult an EV-certified technician for component replacement

Related Powertrain fault codes

P0100 Mass or Volume Air Flow Circuit Malfunction P0102 Mass or Volume Air Flow Circuit Low Input P0103 Mass or Volume Air Flow Circuit High Input P0105 Manifold Absolute Pressure/Barometric Pressure Circuit P0107 Manifold Absolute Pressure/Barometric Pressure Circuit P0108 Manifold Absolute Pressure/Barometric Pressure Circuit P0110 IAT Circuit Malfunction P0117 Engine Coolant Temperature Circuit Low Input