P1742

What does P1742 mean?

P-code P1742 means "Lockup Solenoid System". It is a manufacturer-specific diagnostic trouble code (DTC) in the powertrain. A fault has been detected in the lockup solenoid system — the control module has logged this condition during self-diagnostics. This code can be monitored, but service is recommended to prevent escalation. This code applies to OBD-II compliant electric and hybrid vehicles.

Possible Causes

• Faulty or failed component in the powertrain
• Damaged or corroded wiring and electrical connectors
• Control module software error or firmware fault
• Poor or missing ground connection at the affected module

Recommended Actions

1. 1 Note the alert and schedule a diagnostic appointment when convenient
2. 2 Scan for all DTCs with an OBD-II scanner — note any related codes stored alongside P1742
3. 3 Inspect the powertrain component and its wiring for visible damage
4. 4 Check for water intrusion in connector areas and clean contacts if corroded
5. 5 Clear the DTC, road-test the vehicle, and re-scan to confirm whether the fault returns
6. 6 If the fault persists after inspection and clearing, consult an EV-certified technician for component replacement

Related Powertrain fault codes