P1873
WarningTransmission Automatic 4-Wheel Drive Indicator (Lamp) Circuit Failure
Is it safe to drive?
🟡 Check the vehicle display for drive or charge restrictions and schedule service promptly.
What does P1873 mean?
P-code P1873 means "Transmission Automatic 4-Wheel Drive Indicator (Lamp) Circuit Failure". It is a manufacturer-specific diagnostic trouble code (DTC) in the transmission. A fault has been detected in the transmission automatic 4-wheel drive indicator (lamp) circuit failure — the control module has logged this condition during self-diagnostics. This warning should be addressed within the next few days to avoid further damage. This code applies to OBD-II compliant electric and hybrid vehicles.
Possible Causes
- Faulty or failed component in the transmission
- Damaged or corroded wiring and electrical connectors
- Control module software error or firmware fault
- Poor or missing ground connection at the affected module
Recommended Actions
- 1 Avoid aggressive driving and schedule a diagnostic appointment within the next 1–3 days
- 2 Scan for all DTCs with an OBD-II scanner — note any related codes stored alongside P1873
- 3 Inspect the transmission component and its wiring for visible damage
- 4 Check for water intrusion in connector areas and clean contacts if corroded
- 5 Clear the DTC, road-test the vehicle, and re-scan to confirm whether the fault returns
- 6 If the fault persists after inspection and clearing, consult an EV-certified technician for component replacement
Related Transmission fault codes
P0701 Transmission Control System Malfunction P0704 Torque Converter/Brake Switch B Circuit Malfunction P0706 Transmission Range Sensor Circuit malfunction (PRNDL In P0708 Transmission Range Sensor Circuit Low Input P0709 Transmission Range Sensor Circuit High Input P0711 Transmission Fluid Temperature Sensor Circuit Malfuncti P0713 Transmission Fluid Temperature Sensor Circuit Low Input P0714 Transmission Fluid Temperature Sensor Circuit High Inpu