P1875
WarningTransmission Component Slipping/ Transmission Mechanical Transfer Case 4x4 Switch Circuit Failure
Is it safe to drive?
🟡 Check the vehicle display for drive or charge restrictions and schedule service promptly.
What does P1875 mean?
P-code P1875 means "Transmission Component Slipping/ Transmission Mechanical Transfer Case 4x4 Switch Circuit Failure". It is a manufacturer-specific diagnostic trouble code (DTC) in the transmission. A fault has been detected in the transmission component slipping/ transmission mechanical transfer case 4x4 switch circuit failure — the control module has logged this condition during self-diagnostics. This warning should be addressed within the next few days to avoid further damage. This code applies to OBD-II compliant electric and hybrid vehicles.
Possible Causes
- Faulty or failed component in the transmission
- Damaged or corroded wiring and electrical connectors
- Control module software error or firmware fault
- Poor or missing ground connection at the affected module
Recommended Actions
- 1 Avoid aggressive driving and schedule a diagnostic appointment within the next 1–3 days
- 2 Scan for all DTCs with an OBD-II scanner — note any related codes stored alongside P1875
- 3 Inspect the transmission component and its wiring for visible damage
- 4 Check for water intrusion in connector areas and clean contacts if corroded
- 5 Clear the DTC, road-test the vehicle, and re-scan to confirm whether the fault returns
- 6 If the fault persists after inspection and clearing, consult an EV-certified technician for component replacement