U2012

What does U2012 mean?

U-code U2012 means "Communication Bus Error (Non SCP)". It is a generic OBD-II diagnostic trouble code (DTC) in the vehicle network (CAN/LIN bus). A communication failure has been detected — the module responsible for the communication bus error (non scp) is not responding on the vehicle network. This code can be monitored, but service is recommended to prevent escalation. This code applies to OBD-II compliant electric and hybrid vehicles.

Possible Causes

• CAN bus wiring fault (short, open, or termination resistor failure)
• Faulty control module not transmitting on the vehicle network
• Power supply issue preventing the module from initializing
• Software mismatch or corruption in the affected module

Recommended Actions

1. 1 Note the alert and schedule a diagnostic appointment when convenient
2. 2 Scan for all DTCs with an OBD-II scanner — note any related codes stored alongside U2012
3. 3 Check CAN bus wiring for damage; verify termination resistance (should be ~120 Ω between CAN-H and CAN-L)
4. 4 Verify power supply and ground connections at the affected module
5. 5 Clear the DTC, road-test the vehicle, and re-scan to confirm whether the fault returns
6. 6 If the fault persists after inspection and clearing, consult an EV-certified technician for component replacement

Related Network fault codes