P0183

What does P0183 mean?

P-code P0183 means "Fuel Temperature Sensor A Circuit Low Input". It is a generic OBD-II diagnostic trouble code (DTC) in the fuel system. The sensor or circuit is reading a voltage or signal value below its expected minimum range for the fuel temperature sensor a circuit low input. This warning should be addressed within the next few days to avoid further damage. This code applies to OBD-II compliant electric and hybrid vehicles.

Possible Causes

• Low or no reference voltage supplied to the sensor
• Faulty sensor with a weak or intermittent output signal
• High resistance in the signal wire reducing voltage at the module
• Poor ground connection at the sensor or module

Recommended Actions

1. 1 Avoid aggressive driving and schedule a diagnostic appointment within the next 1–3 days
2. 2 Scan for all DTCs with an OBD-II scanner — note any related codes stored alongside P0183
3. 3 Check the sensor reference voltage (should be ~5V) and signal output with a multimeter
4. 4 Clean or replace the sensor connector — corrosion is a common cause of out-of-range voltage readings
5. 5 Clear the DTC, road-test the vehicle, and re-scan to confirm whether the fault returns
6. 6 If the fault persists after inspection and clearing, consult an EV-certified technician for component replacement

Related Fuel fault codes