P312A
WarningEV System CAN Communication Loss
Is it safe to drive?
🟡 Check the vehicle display for drive or charge restrictions and schedule service promptly.
What does P312A mean?
P-code P312A means "EV System CAN Communication Loss". It is a manufacturer-specific diagnostic trouble code (DTC) in the vehicle network (CAN/LIN bus). A communication failure has been detected — the module responsible for the ev system can communication loss is not responding on the vehicle network. This warning should be addressed within the next few days to avoid further damage. This code applies to OBD-II compliant electric and hybrid vehicles.
Possible Causes
- CAN bus wiring fault (short, open, or termination resistor failure)
- Faulty control module not transmitting on the vehicle network
- Power supply issue preventing the module from initializing
- Software mismatch or corruption in the affected module
Recommended Actions
- 1 Avoid aggressive driving and schedule a diagnostic appointment within the next 1–3 days
- 2 Scan for all DTCs with an OBD-II scanner — note any related codes stored alongside P312A
- 3 Check CAN bus wiring for damage; verify termination resistance (should be ~120 Ω between CAN-H and CAN-L)
- 4 Verify power supply and ground connections at the affected module
- 5 Clear the DTC, road-test the vehicle, and re-scan to confirm whether the fault returns
- 6 If the fault persists after inspection and clearing, consult an EV-certified technician for component replacement