U197A

What does U197A mean?

U-code U197A means "Lost Communication with Propulsion Power Management Module". It is a manufacturer-specific diagnostic trouble code (DTC) in the battery system. A communication failure has been detected — the module responsible for the lost communication with propulsion power management module is not responding on the vehicle network. This warning should be addressed within the next few days to avoid further damage. This code applies to OBD-II compliant electric and hybrid vehicles.

Possible Causes

• CAN bus wiring fault (short, open, or termination resistor failure)
• Faulty control module not transmitting on the vehicle network
• Power supply issue preventing the module from initializing
• Software mismatch or corruption in the affected module

Recommended Actions

1. 1 Avoid aggressive driving and schedule a diagnostic appointment within the next 1–3 days
2. 2 Scan for all DTCs with an OBD-II scanner — note any related codes stored alongside U197A
3. 3 Check CAN bus wiring for damage; verify termination resistance (should be ~120 Ω between CAN-H and CAN-L)
4. 4 Verify power supply and ground connections at the affected module
5. 5 Clear the DTC, road-test the vehicle, and re-scan to confirm whether the fault returns
6. 6 If the fault persists after inspection and clearing, consult an EV-certified technician for component replacement