APS-W065
APS_w065_deserializerOvercurrent
Also written as APS_W065 / APS W065 / APS_w065_deserializerOvercurrent / aps_w065_deserializerovercurrent
Why does the exact Tesla alert ID matter?
Record the exact alert ID, including underscores, suffixes, and companion alerts. Tesla alerts that look similar can point to different modules, timestamps, and service procedures.
What does APS-W065 mean?
Tesla warning code in the Autopilot System (APS) module. Warns if vechile starts departing current lane right after Autosteer is disengaged AP detects that vehicle is departing lanes within a few seconds of disengaging Autosteer Driver takes over control by putting hands on steering wheel Visual and audible warning is issued to the driver to avoid the lane departure PMM applying brakes to avoid collision Potential collision conditions present due to incorrect pedal application AP will brake to avoid potential collision APS does not receive one or more msgs from GTW for more than 10 cycles Clears when GTW msgs are received again Features that depend on GTW msgs will be disabled Warns if one or more voltage rails fails to reach expected voltage level One or more voltage rails fails to reach expected voltage level All voltage rails report expected voltage levels Some AP components may not be powered correctly APS does not receive one or more msgs from Radar for more than 10 cycles Clears when Radar msgs are received again Features that depend on Radar msgs will be disabled Pedal Misapplication Mitigation activated AP will brake/prevent acceleration to avoid potential collision
Original Description
Warns if vechile starts departing current lane right after Autosteer is disengaged AP detects that vehicle is departing lanes within a few seconds of disengaging Autosteer Driver takes over control by putting hands on steering wheel Visual and audible warning is issued to the driver to avoid the lane departure PMM applying brakes to avoid collision Potential collision conditions present due to incorrect pedal application AP will brake to avoid potential collision APS does not receive one or more msgs from GTW for more than 10 cycles Clears when GTW msgs are received again Features that depend on GTW msgs will be disabled Warns if one or more voltage rails fails to reach expected voltage level One or more voltage rails fails to reach expected voltage level All voltage rails report expected voltage levels Some AP components may not be powered correctly APS does not receive one or more msgs from Radar for more than 10 cycles Clears when Radar msgs are received again Features that depend on Radar msgs will be disabled Pedal Misapplication Mitigation activated AP will brake/prevent acceleration to avoid potential collision
Affected Tesla Models
What You May Notice
- Autopilot System alert: Warns if vechile starts departing current lane right after Autosteer is disengaged AP detects that vehicle is departing
- Camera or sensor obstruction notification on the touchscreen
- Autopilot features greyed out in the drive settings menu
How to Diagnose and Resolve
- 1 Check all cameras and sensors for dirt, ice, or obstructions — clean if needed
- 2 Reboot the vehicle
- 3 Check for OTA updates (Autopilot improvements are frequently delivered OTA)
- 4 Schedule service if Autopilot remains unavailable after cleaning and rebooting
Severity Notes
APS-W065 is a Warning in the Autopilot System system. Schedule service soon. Monitor your vehicle for additional warnings.