BMS-F110
BMS_f110_SW_Module_Vsense
Also written as BMS_F110 / BMS F110 / BMS_f110_SW_Module_Vsense / bms_f110_sw_module_vsense
Why does the exact Tesla alert ID matter?
Record the exact alert ID, including underscores, suffixes, and companion alerts. Tesla alerts that look similar can point to different modules, timestamps, and service procedures.
What does BMS-F110 mean?
Tesla fault code in the Battery Management System (BMS) module. When not in a Drive state, the brick voltages do not sum up to the module voltages accurately, and all of the module voltages do not sum to the pack voltage. This could due to a short / open circuit.
Original Description
When not in a Drive state, the brick voltages do not sum up to the module voltages accurately, and all of the module voltages do not sum to the pack voltage. This could due to a short / open circuit.
Affected Tesla Models
What You May Notice
- Red warning light on dashboard: When not in a Drive state, the brick voltages do not sum up to the module voltages accurately, and all of the module vol
- Vehicle may refuse to drive or charge until the fault is cleared
- Sudden power reduction or shutdown may occur while driving
How to Diagnose and Resolve
- 1 Stop driving immediately and move to a safe location
- 2 Do not attempt to charge the vehicle — active fault: "When not in a Drive state, the brick voltages do not sum up "
- 3 Call Tesla Roadside Assistance (+1-877-798-3752) for a flatbed tow
- 4 At the Service Center, Tesla technicians will inspect the HV battery pack and BMS firmware
Severity Notes
BMS-F110 is classified as a Fault, indicating a critical issue in the Battery Management System system. Do not continue driving and contact Tesla Service immediately.