BMS-F122
BMS_f122_SW_BMS_PCB_Temp_Sensor
Also written as BMS_F122 / BMS F122 / BMS_f122_SW_BMS_PCB_Temp_Sensor / bms_f122_sw_bms_pcb_temp_sensor
Why does the exact Tesla alert ID matter?
Record the exact alert ID, including underscores, suffixes, and companion alerts. Tesla alerts that look similar can point to different modules, timestamps, and service procedures.
What does BMS-F122 mean?
Tesla fault code in the Battery Management System (BMS) module. The Battery Management System (BMS) Printed Circuit Board (PCB) temperature sensor is giving an impossible reading.
Original Description
The Battery Management System (BMS) Printed Circuit Board (PCB) temperature sensor is giving an impossible reading.
Affected Tesla Models
What You May Notice
- Red warning light on dashboard: The Battery Management System (BMS) Printed Circuit Board (PCB) temperature sensor is giving an impossible reading.
- Vehicle may refuse to drive or charge until the fault is cleared
- Sudden power reduction or shutdown may occur while driving
How to Diagnose and Resolve
- 1 Stop driving immediately and move to a safe location
- 2 Do not attempt to charge the vehicle — active fault: "The Battery Management System (BMS) Printed Circuit Board (P"
- 3 Call Tesla Roadside Assistance (+1-877-798-3752) for a flatbed tow
- 4 At the Service Center, Tesla technicians will inspect the HV battery pack and BMS firmware
Severity Notes
BMS-F122 is classified as a Fault, indicating a critical issue in the Battery Management System system. Do not continue driving and contact Tesla Service immediately.