TESLA Fault
BMS-F132
BMS_f132_HW_BMB_OTP_Uncorrctbl
Also written as BMS_F132 / BMS F132 / BMS_f132_HW_BMB_OTP_Uncorrctbl / bms_f132_hw_bmb_otp_uncorrctbl
Why does the exact Tesla alert ID matter?
Record the exact alert ID, including underscores, suffixes, and companion alerts. Tesla alerts that look similar can point to different modules, timestamps, and service procedures.
What does BMS-F132 mean?
Tesla fault code in the Battery Management System (BMS) module. There is a problem in programming the T536A's OTP, and a subsequent failure is reported.
Original Description
There is a problem in programming the T536A's OTP, and a subsequent failure is reported.
Affected Tesla Models
Model SModel XModel 3Model YCybertruck
What You May Notice
- Red warning light on dashboard: There is a problem in programming the T536A's OTP, and a subsequent failure is reported.
- Vehicle may refuse to drive or charge until the fault is cleared
- Sudden power reduction or shutdown may occur while driving
How to Diagnose and Resolve
- 1 Stop driving immediately and move to a safe location
- 2 Do not attempt to charge the vehicle — active fault: "There is a problem in programming the T536A's OTP, and a sub"
- 3 Call Tesla Roadside Assistance (+1-877-798-3752) for a flatbed tow
- 4 At the Service Center, Tesla technicians will inspect the HV battery pack and BMS firmware
Severity Notes
BMS-F132 is classified as a Fault, indicating a critical issue in the Battery Management System system. Do not continue driving and contact Tesla Service immediately.
Other BMS Codes
BMS_a001 BMS_a002 Tesla alert code in the Battery Management System (BMS) modu... BMS_a003 Tesla alert code in the Battery Management System (BMS) modu... BMS_a004 Tesla alert code in the Battery Management System (BMS) modu... BMS_a007 Tesla alert code in the Battery Management System (BMS) modu... BMS_a016 Tesla alert code in the Battery Management System (BMS) modu... BMS_a017 BMS_a018
View all BMS codes →