DI-F169
DI_f169_opdUnavailable
Also written as DI_F169 / DI F169 / DI_f169_opdUnavailable / di_f169_opdunavailable
Why does the exact Tesla alert ID matter?
Record the exact alert ID, including underscores, suffixes, and companion alerts. Tesla alerts that look similar can point to different modules, timestamps, and service procedures.
What does DI-F169 mean?
Tesla fault code in the Drive Inverter (DI) module. This alert triggers when "HOLD" stopping mode is disabled temporarily or for the rest of the drive cycle. The stopping mode will change to "ROLL" behavior while it is unavailable.
Original Description
This alert triggers when "HOLD" stopping mode is disabled temporarily or for the rest of the drive cycle. The stopping mode will change to "ROLL" behavior while it is unavailable.
Affected Tesla Models
What You May Notice
- drive inverter critical fault: This alert triggers when "HOLD" stopping mode is disabled temporarily or for the rest of the drive cycle. The stopping m
- Vehicle enters reduced power or limp mode; acceleration severely limited
- Red warning on dashboard — vehicle may not allow driving
How to Diagnose and Resolve
- 1 Safely pull over and stop the vehicle
- 2 Attempt a full reboot: hold both scroll wheels until the Tesla logo appears
- 3 If power is not restored after reboot (fault: "This alert triggers when "HOLD" stopping mode is d"), call Tesla Roadside Assistance
- 4 The inverter or motor controller will require inspection at a Service Center
Severity Notes
DI-F169 is classified as a Fault, indicating a critical issue in the Drive Inverter system. Do not continue driving and contact Tesla Service immediately.