TESLA Alert

IBST-A028

IBST_a028_ecuBistFaultCtrFault

Also written as IBST_A028 / IBST A028 / IBST_a028_ecuBistFaultCtrFault / ibst_a028_ecubistfaultctrfault

System
IBST
Integrated Brake System
Type
Alert
Category
Chassis
Severity
Alert

Why does the exact Tesla alert ID matter?

Record the exact alert ID, including underscores, suffixes, and companion alerts. Tesla alerts that look similar can point to different modules, timestamps, and service procedures.

What does IBST-A028 mean?

Tesla alert code in the Integrated Brake System (IBST) module. BIST didn't switch off electrically after too much received wrong BIST commands. ECU internal fault, check wiring to the unit and/or re-flash. If problem continures after several power cycles, reolace unit. Phase Current 1 out of range low. ECU internal fault, check wiring to the unit and or re-flash. If problem continures after several power cycles, reolace unit. Voltage monitor of microcontroller has detected a failure of the microcontroller supply voltage. ECU internal fault, check wiring to the unit and/or re-flash. If problem continues after several power cycles, replace unit. EPBL_systemStatus message not received or corrupt

Original Description

BIST didn't switch off electrically after too much received wrong BIST commands. ECU internal fault, check wiring to the unit and/or re-flash. If problem continures after several power cycles, reolace unit. Phase Current 1 out of range low. ECU internal fault, check wiring to the unit and or re-flash. If problem continures after several power cycles, reolace unit. Voltage monitor of microcontroller has detected a failure of the microcontroller supply voltage. ECU internal fault, check wiring to the unit and/or re-flash. If problem continues after several power cycles, replace unit. EPBL_systemStatus message not received or corrupt

Affected Tesla Models

Model SModel XModel 3Model Y

What You May Notice

  • Integrated Brake System alert: BIST didn't switch off electrically after too much received wrong BIST commands. ECU internal fault, check wiring to the
  • No noticeable change in braking performance under normal driving

How to Diagnose and Resolve

  1. 1 Reboot the vehicle
  2. 2 Monitor over the next few drives
  3. 3 Schedule service if the alert reappears

Severity Notes

IBST-A028 is an Alert in the Integrated Brake System system. Confirm the vehicle screen and Tesla app show no driving or charging restrictions, and schedule service if the alert returns.

Other IBST Codes

IBST_a001 IBST_a002 IBST_a003 IBST_a004 IBST_a005 IBST_a006 Tesla alert code in the Integrated Brake System (IBST) modul... IBST_a007 IBST_a008
View all IBST codes →