TESLA Alert

IBST-A157

IBST_a157_masterCylPressInvalid

Also written as IBST_A157 / IBST A157 / IBST_a157_masterCylPressInvalid / ibst_a157_mastercylpressinvalid

System
IBST
Integrated Brake System
Type
Alert
Category
Chassis
Severity
Alert

Why does the exact Tesla alert ID matter?

Record the exact alert ID, including underscores, suffixes, and companion alerts. Tesla alerts that look similar can point to different modules, timestamps, and service procedures.

What does IBST-A157 mean?

Tesla alert code in the Integrated Brake System (IBST) module. Scl: ESPiB3_pMC1 Invalid Value DTS off set is too high Confirmed Phase Current 2 out of range low. ECU internal fault, check wiring to the unit and or re-flash. If problem continures after several power cycles, reolace unit. The measured average coil resistivity is above the max threshold. Linear Position Sensor Channel 1 Sensor internal failure FW set in case of temperature degradation level1 Vpre was externally feed. Possible internal shortcircuit. ECU internal fault, check wiring to the unit and/or re-flash. If problem continures after several power cycles, reolace unit.

Original Description

Scl: ESPiB3_pMC1 Invalid Value DTS off set is too high Confirmed Phase Current 2 out of range low. ECU internal fault, check wiring to the unit and or re-flash. If problem continures after several power cycles, reolace unit. The measured average coil resistivity is above the max threshold. Linear Position Sensor Channel 1 Sensor internal failure FW set in case of temperature degradation level1 Vpre was externally feed. Possible internal shortcircuit. ECU internal fault, check wiring to the unit and/or re-flash. If problem continures after several power cycles, reolace unit.

Affected Tesla Models

Model SModel XModel 3Model Y

What You May Notice

  • Integrated Brake System alert: Scl: ESPiB3_pMC1 Invalid Value DTS off set is too high Confirmed Phase Current 2 out of range low. ECU internal fault, c
  • No noticeable change in braking performance under normal driving

How to Diagnose and Resolve

  1. 1 Reboot the vehicle
  2. 2 Monitor over the next few drives
  3. 3 Schedule service if the alert reappears

Severity Notes

IBST-A157 is an Alert in the Integrated Brake System system. Confirm the vehicle screen and Tesla app show no driving or charging restrictions, and schedule service if the alert returns.

Other IBST Codes

IBST_a001 IBST_a002 IBST_a003 IBST_a004 IBST_a005 IBST_a006 Tesla alert code in the Integrated Brake System (IBST) modul... IBST_a007 IBST_a008
View all IBST codes →