TESLA Diagnostic
IBST-D000
IBST_d000_bmsInitTestFail
Also written as IBST_D000 / IBST D000 / IBST_d000_bmsInitTestFail / ibst_d000_bmsinittestfail
Why does the exact Tesla alert ID matter?
Record the exact alert ID, including underscores, suffixes, and companion alerts. Tesla alerts that look similar can point to different modules, timestamps, and service procedures.
What does IBST-D000 mean?
Tesla diagnostic code in the Integrated Brake System (IBST) module. The initial test of the Booster Master Switch and the active Reverse Voltage Protection (aRVP) FETs has failed.?
Original Description
The initial test of the Booster Master Switch and the active Reverse Voltage Protection (aRVP) FETs has failed.?
Affected Tesla Models
Model SModel XModel 3Model Y
What You May Notice
- Integrated Brake System alert: The initial test of the Booster Master Switch and the active Reverse Voltage Protection (aRVP) FETs has failed.?
- No noticeable change in braking performance under normal driving
How to Diagnose and Resolve
- 1 Reboot the vehicle
- 2 Monitor over the next few drives
- 3 Schedule service if the alert reappears
Severity Notes
IBST-D000 is a diagnostic or informational code in the Integrated Brake System system. Typically no immediate action is required.
Other IBST Codes
IBST_a001 IBST_a002 IBST_a003 IBST_a004 IBST_a005 IBST_a006 Tesla alert code in the Integrated Brake System (IBST) modul... IBST_a007 IBST_a008
View all IBST codes →