IBST-D067
IBST_d067_sOutRodToPressVal
Also written as IBST_D067 / IBST D067 / IBST_d067_sOutRodToPressVal / ibst_d067_soutrodtopressval
Why does the exact Tesla alert ID matter?
Record the exact alert ID, including underscores, suffixes, and companion alerts. Tesla alerts that look similar can point to different modules, timestamps, and service procedures.
What does IBST-D067 mean?
Tesla diagnostic code in the Integrated Brake System (IBST) module. The pressure value does not fit to the output rod stroke. This indicates that there was not enough pressure in the master cylinder when the pedal was pressed. There could be air in the brake lines or master cylinder, or the brake fluid is low.
Original Description
The pressure value does not fit to the output rod stroke. This indicates that there was not enough pressure in the master cylinder when the pedal was pressed. There could be air in the brake lines or master cylinder, or the brake fluid is low.
Affected Tesla Models
What You May Notice
- Integrated Brake System alert: The pressure value does not fit to the output rod stroke. This indicates that there was not enough pressure in the maste
- No noticeable change in braking performance under normal driving
How to Diagnose and Resolve
- 1 Reboot the vehicle
- 2 Monitor over the next few drives
- 3 Schedule service if the alert reappears
Severity Notes
IBST-D067 is a diagnostic or informational code in the Integrated Brake System system. Typically no immediate action is required.