PM-A060
PM_a060_onePedalDrivingInhibit
Also written as PM_A060 / PM A060 / PM_a060_onePedalDrivingInhibit / pm_a060_onepedaldrivinginhibit
Why does the exact Tesla alert ID matter?
Record the exact alert ID, including underscores, suffixes, and companion alerts. Tesla alerts that look similar can point to different modules, timestamps, and service procedures.
What does PM-A060 mean?
Tesla alert code in the Power Management (PM) module. Pedal Monitor Warning: One Pedal Driving module inhibited. The safety monitor sets this condition when torque production error is detected while One Pedal Driving module is active. The safety monitor will disable the One Pedal Driving module for the remainder of the drive cycle. Pedal Monitor Warning: Stability Control actuated in the wrong direction. This condiiton is set when CAN communication from an offending ECU is intermittent, or fails a communication integrity check on the secondary CAN bus. Pedal Monitor Warning: ESP CAN node is missing. The safety monitor sets this condition when CAN communication from ESP is considered irrational or missing. ESP is considered not communicating on CAN for remainder of drive cycle. Pedal Monitor Fault: Torque Command Qualifier set to faulted The safety monitor sets this condition torque production error is detected
Original Description
Pedal Monitor Warning: One Pedal Driving module inhibited. The safety monitor sets this condition when torque production error is detected while One Pedal Driving module is active. The safety monitor will disable the One Pedal Driving module for the remainder of the drive cycle. Pedal Monitor Warning: Stability Control actuated in the wrong direction. This condiiton is set when CAN communication from an offending ECU is intermittent, or fails a communication integrity check on the secondary CAN bus. Pedal Monitor Warning: ESP CAN node is missing. The safety monitor sets this condition when CAN communication from ESP is considered irrational or missing. ESP is considered not communicating on CAN for remainder of drive cycle. Pedal Monitor Fault: Torque Command Qualifier set to faulted The safety monitor sets this condition torque production error is detected
Affected Tesla Models
What You May Notice
- PM-A060 may appear with another Tesla alert in the Power Management (PM) system.
- The vehicle may limit charging, driving, comfort, or safety features depending on the active alerts.
- The alert may clear after sleep, but recurring alerts should be treated as service-relevant.
How to Diagnose and Resolve
- 1 Reboot the vehicle
- 2 Check for OTA software updates
- 3 Monitor over the next few drives; schedule service if alert recurs
Severity Notes
PM-A060 is an Alert in the Power Management system. Confirm the vehicle screen and Tesla app show no driving or charging restrictions, and schedule service if the alert returns.