TESLA Info

DGLAB-I009

DGLAB_i009_EPB_unitStatus

Also written as DGLAB_I009 / DGLAB I009 / DGLAB_i009_EPB_unitStatus / dglab_i009_epb_unitstatus

System
DGLAB
DGLAB
Type
Info
Category
Network
Severity
Diagnostic / Info

Why does the exact Tesla alert ID matter?

Record the exact alert ID, including underscores, suffixes, and companion alerts. Tesla alerts that look similar can point to different modules, timestamps, and service procedures.

What does DGLAB-I009 mean?

Tesla info code in the DGLAB (DGLAB) module. ==EPB_STATUS_DYNAMIC_PARKINGandspeedcrossesabove88kphoraccelerationisabove5mphs Car interrupted parking due to travelling at speed, Electronic Parking Brake not applied The Emergency Notification Signal harness may be disconnected or the RCM may be MIA. EPB releases no-load is measured using derivative of current. Currently in ghosted alert. An issue with a switch has been detected. Customer facing alert issued when Electronic Parking Brake is applied at higher than 5mph

Original Description

==EPB_STATUS_DYNAMIC_PARKINGandspeedcrossesabove88kphoraccelerationisabove5mphs Car interrupted parking due to travelling at speed, Electronic Parking Brake not applied The Emergency Notification Signal harness may be disconnected or the RCM may be MIA. EPB releases no-load is measured using derivative of current. Currently in ghosted alert. An issue with a switch has been detected. Customer facing alert issued when Electronic Parking Brake is applied at higher than 5mph

Affected Tesla Models

Model SModel XModel 3Model Y

What You May Notice

  • DGLAB alert: ==EPB_STATUS_DYNAMIC_PARKINGandspeedcrossesabove88kphoraccelerationisabove5mphs Car interrupted parking due to travellin
  • Touchscreen may show an error for one or more apps or settings
  • Feature may restore itself after a reboot

How to Diagnose and Resolve

  1. 1 Perform a soft reboot (hold both scroll wheels for ~10 seconds)
  2. 2 Check for pending OTA software updates
  3. 3 If the issue persists, schedule a service appointment

Severity Notes

DGLAB-I009 is a diagnostic or informational code in the DGLAB system. Typically no immediate action is required.

Other DGLAB Codes

View all DGLAB codes →