DGLAB-I019
DGLAB_i019_ECU_15
Also written as DGLAB_I019 / DGLAB I019 / DGLAB_i019_ECU_15 / dglab_i019_ecu_15
Why does the exact Tesla alert ID matter?
Record the exact alert ID, including underscores, suffixes, and companion alerts. Tesla alerts that look similar can point to different modules, timestamps, and service procedures.
What does DGLAB-I019 mean?
Tesla info code in the DGLAB (DGLAB) module. Radar functions are disabled and autopilot features will be disabled. ECU Internal fault - Internal CRC Failure Radar Environmental Model (EM) was Reset ECU Internal ADC underVoltage - Indicates an under voltage condition for the following voltage rails 1V25, 3V3, 4V5, 5V Set when the voltages for the respective rails are above threshold Cleared when over voltages return to nominal level The restraint system may not function as designed. There is a fault with the left C-Pillar impact sensor. The restraint controller has not learned the vehicle VIN or detects a VIN mismatch. The VIN is learned or the mismatch is corrected.
Original Description
Radar functions are disabled and autopilot features will be disabled. ECU Internal fault - Internal CRC Failure Radar Environmental Model (EM) was Reset ECU Internal ADC underVoltage - Indicates an under voltage condition for the following voltage rails 1V25, 3V3, 4V5, 5V Set when the voltages for the respective rails are above threshold Cleared when over voltages return to nominal level The restraint system may not function as designed. There is a fault with the left C-Pillar impact sensor. The restraint controller has not learned the vehicle VIN or detects a VIN mismatch. The VIN is learned or the mismatch is corrected.
Affected Tesla Models
What You May Notice
- DGLAB alert: Radar functions are disabled and autopilot features will be disabled. ECU Internal fault - Internal CRC Failure Radar En
- Touchscreen may show an error for one or more apps or settings
- Feature may restore itself after a reboot
How to Diagnose and Resolve
- 1 Perform a soft reboot (hold both scroll wheels for ~10 seconds)
- 2 Check for pending OTA software updates
- 3 If the issue persists, schedule a service appointment
Severity Notes
DGLAB-I019 is a diagnostic or informational code in the DGLAB system. Typically no immediate action is required.