GTW-W230
GTW_w230_cmpMia
Also written as GTW_W230 / GTW W230 / GTW_w230_cmpMia / gtw_w230_cmpmia
Why does the exact Tesla alert ID matter?
Record the exact alert ID, including underscores, suffixes, and companion alerts. Tesla alerts that look similar can point to different modules, timestamps, and service procedures.
What does GTW-W230 mean?
Tesla warning code in the Gateway (GTW) module. The Gateway shall set this alert to 1 when it is unable to receive controller area network (CAN) data from the CAN enabled compressor. The compressor should send data when:The compressor is enabled in internal.dat (compressorType 1).The HVAC rail is on.The contactors are closed.
Original Description
The Gateway shall set this alert to 1 when it is unable to receive controller area network (CAN) data from the CAN enabled compressor. The compressor should send data when:The compressor is enabled in internal.dat (compressorType 1).The HVAC rail is on.The contactors are closed.
Affected Tesla Models
What You May Notice
- Gateway alert: The Gateway shall set this alert to 1 when it is unable to receive controller area network (CAN) data from the CAN enabl
- One or more features may temporarily be unavailable
- Usually resolves after a reboot
How to Diagnose and Resolve
- 1 Perform a soft reboot (hold both scroll wheels)
- 2 Check for pending OTA software updates
- 3 Schedule service if the alert recurs frequently
Severity Notes
GTW-W230 is a Warning in the Gateway system. Schedule service soon. Monitor your vehicle for additional warnings.