Tesla MCU Alert Codes

Tesla unknown code in the Media Control Unit (MCU) module. The media control unit (MCU) has detected that the seat belt is unbuckled.

Tesla unknown code in the Media Control Unit (MCU) module. This alert indicates the media control unit (MCU) has detected that the washer fluid level in the windshield washer system is low.

Tesla unknown code in the Media Control Unit (MCU) module. The headlights are on and a vehicle door is open.

Tesla unknown code in the Media Control Unit (MCU) module related to eas in jack mode.

Tesla unknown code in the Media Control Unit (MCU) module. The media control unit (MCU) has detected that the frunk / front trunk is open.

Tesla unknown code in the Media Control Unit (MCU) module. The media control unit (MCU) has detected that the driver door is open.

Tesla unknown code in the Media Control Unit (MCU) module. The media control unit (MCU) has detected that a door is open. This alert is applicable to the passenger front door and both rear doors. It does not apply to the frunk or liftgate.

Tesla unknown code in the Media Control Unit (MCU) module. The dead key entry / start feature has been used (usually because the key fob battery is too low). If this alert is present, passive lock is disabled and this alert appears to indicate that the feature will not work.

Tesla unknown code in the Media Control Unit (MCU) module related to trunk open.

Tesla unknown code in the Media Control Unit (MCU) module related to not on private property.

Tesla unknown code in the Media Control Unit (MCU) module related to falcon door open.

Tesla unknown code in the Media Control Unit (MCU) module. Regen has been improved (increased) for the dual motor Model S refresh vehicles. This alert will be shown 3 times for existing user profiles with Regen set to Standard.?

Tesla unknown code in the Media Control Unit (MCU) module related to ap trial expired.

Tesla warning code in the Media Control Unit (MCU) module related to touch screen error.

Tesla warning code in the Media Control Unit (MCU) module. The brake fluid levels have dropped below acceptable levels.

Tesla warning code in the Media Control Unit (MCU) module related to display firmware mismatch.

Tesla warning code in the Media Control Unit (MCU) module. The media control unit (MCU) has detected that the maps are missing.

Tesla warning code in the Media Control Unit (MCU) module. This alert indicates that the measured tire pressure is below the hard threshold value (25 psi for most markets and configurations). It does not indicate a system malfunction and should not be confused with MCU_w012_TPMS_systemFault.

Tesla warning code in the Media Control Unit (MCU) module. This alert indicates that the tire pressure monitoring system (TPMS) electronic control unit (ECU) has detected a tire pressure that is above its maximum allowable pressure of 58 psi.

Tesla warning code in the Media Control Unit (MCU) module. This alert indicates that the measured tire pressure is below the soft threshold value (usually about 4 psi below the recommended cold pressure). It does not indicate a system malfunction and should not be confused with MCU_w012_TPMS_systemFault.

Tesla warning code in the Media Control Unit (MCU) module. This alert indicates that the tire pressure monitor system (TPMS) electronic control unit (ECU) cannot read one of the sensors or has detected that there is an issue internal to the ECU. If this alert is present, a sensor signal may have dropped out, but the alert only indicates that the ECU is in a fault state and cannot reliably report tire pressures or produce the appropriate pressure-related warnings.

Tesla warning code in the Media Control Unit (MCU) module. This alert indicates the installed maps do not match the configured region.

Tesla warning code in the Media Control Unit (MCU) module. The WiFi antenna may be disconnected.

Tesla warning code in the Media Control Unit (MCU) module related to sunroof speed warning.

Tesla warning code in the Media Control Unit (MCU) module. This is a generic customer facing DTC alert that indicates that a DTC is set.

Tesla warning code in the Media Control Unit (MCU) module. USB 5V does not come up after wake.

Tesla warning code in the Media Control Unit (MCU) module. This alert is set by Service Engineering to notify the customer that they should contact their Service Center for certain actions. The reasons for why this alert is set can be highly variable as there is no single cause. This alert is only triggered on vehicles that have provided Tesla diagnostic related information pointing to a condition uniquely present to each respective vehicle that may require repair.

Tesla warning code in the Media Control Unit (MCU) module. This alert indicates that the configuration for the maximum state of charge (SOC) termination does not match the pack installed on the vehicle.

Tesla warning code in the Media Control Unit (MCU) module. This alert indicates that an incompletely fused driver's assistance (DAS) electronic control unit (ECU) is installed in the car. Factory-gated cars must have a fully-fused DAS ECU installed. Note: Do not replace hardware for this alert unless you have confirmed via escalation.

Tesla warning code in the Media Control Unit (MCU) module. The vehicle no longer has cell data access.

Tesla warning code in the Media Control Unit (MCU) module related to brake shift required.

Tesla warning code in the Media Control Unit (MCU) module related to backup camera ipu timeout.

Tesla warning code in the Media Control Unit (MCU) module related to backup camera frame timeout.

Tesla warning code in the Media Control Unit (MCU) module related to backup camera init error.