Tesla PM Alert Codes

Tesla alert code in the Power Management (PM) module related to absolute torque.

Tesla alert code in the Power Management (PM) module related to excessive accel torque.

Tesla alert code in the Power Management (PM) module. Pedal Monitor Warning: Torque Reversal. The safety monitor sets this condition torque production error is detected. Pedal Monitor Warning: Gear Shifter CAN node is missing. The safety monitor sets this condition when CAN communication from Gear Shifter CAN node is considered irrational or missing. Gear Shifter CAN node is considered not communicating on CAN for remainder of drive cycle. Pedal Monitor Warning: Secondary CAN Integrity Check Failed. This condiiton is set when CAN communication from an offending ECU is intermittent, or fails a communication integrity check on the primary CAN bus. This alert will clear when CAN communication is re-established with the offending ECU. No immediate impact, may lead to indicating an MIA condition for the offending ECU if sustained. Pedal Monitor Warning: Absolute Torque. This condiiton is set when CAN peripheral hardware indicates an overrun or transmission error on the primary CAN bus. Pedal Monitor Warning: Inconsistent AEB state. The safety monitor sets this condition when sensor or other ECU inputs into AEB are deemed implausible. The safety monitor will disable automatic emergency braking (AEB) for the remainder of the drive cycle. Pedal Monitor Warning: Cruise Control CAN node is missing. The safety monitor sets this condition when CAN communication from Cruise Control CAN node is considered irrational or missing. Cruise Control CAN node is considered not communicating on CAN for remainder of drive cycle. Pedal Monitor Warning: CMP CAN node is missing. The safety monitor sets this condition when CAN communication from CMP is considered irrational or missing. CMP is considered not communicating on CAN for remainder of drive cycle. Pedal Monitor Warning: Memory corruption detected. Pedal Monitor Warning: Stability Control is interfering with driver's ability to decelerate. Pedal Monitor Warning: High Stack Usage. Pedal Monitor Warning: Deceleration Torque.

Tesla alert code in the Power Management (PM) module related to excessive decel torque.

Tesla alert code in the Power Management (PM) module related to torque in neutral or park.

Tesla alert code in the Power Management (PM) module related to inconsistent di gear.

Tesla alert code in the Power Management (PM) module related to ibst mia.

Tesla alert code in the Power Management (PM) module related to memory error.

Tesla alert code in the Power Management (PM) module related to esp mia.

Tesla alert code in the Power Management (PM) module related to di mia.

Tesla alert code in the Power Management (PM) module related to can data bus a.

Tesla alert code in the Power Management (PM) module related to can hardware bus a.

Tesla alert code in the Power Management (PM) module related to accel pedal error.

Tesla alert code in the Power Management (PM) module related to shifter mia.

Tesla alert code in the Power Management (PM) module related to cruise mia.

Tesla alert code in the Power Management (PM) module related to brake mia.

Tesla alert code in the Power Management (PM) module related to swan mia.

Tesla alert code in the Power Management (PM) module related to dif mia.

Tesla alert code in the Power Management (PM) module related to dir mia.

Tesla alert code in the Power Management (PM) module related to cruise inhibit.

Tesla alert code in the Power Management (PM) module. Diagnostic logging only.

Tesla alert code in the Power Management (PM) module. No immediate impact.

Tesla alert code in the Power Management (PM) module related to di heart beat mia.

Tesla alert code in the Power Management (PM) module related to torque cmd error.

Tesla alert code in the Power Management (PM) module related to inconsistent aeb state.

Tesla alert code in the Power Management (PM) module related to high stack usage.

Tesla alert code in the Power Management (PM) module related to register config error.

Tesla alert code in the Power Management (PM) module related to trq cross check.

Tesla alert code in the Power Management (PM) module. Pedal Monitor Warning: PTC CAN node is missing. The safety monitor sets this condition when CAN communication from PTC is considered irrational or missing. PTC is considered not communicating on CAN for remainder of drive cycle.

Tesla alert code in the Power Management (PM) module related to pre watchdog.

Tesla alert code in the Power Management (PM) module related to hvp mia.

Tesla alert code in the Power Management (PM) module. Pedal Monitor Warning: Master/Slave Torque Sign is Inconsistent. The safety monitor will disable innhibit torque production for the remainder of the drive cycle. Pedal Monitor Warning: Accumulated Torque. Pedal Monitor Warning: iBooster (Brake Assist) node is MIA on CAN for one or multiple messages Pedal Monitor Warning: Inconsistent Autopark state. The safety monitor sets this condition when state follower behavior of the autopark feature is deemed implausible. The safety monitor will disable the autopark feature for the remainder of the drive cycle. Pedal Monitor Warning: Pre-watchdog expired. This condition is set the watchdog GPIO pin is set, indicating an immediate watchdog reset is imminent. This alert is intended to collect diagnostic information only. This alert will clear immediately. This alert provides an imminent warning of a likely watchdog reset event. Pedal Monitor Warning: VCFRONT CAN node is missing. The safety monitor sets this condition when CAN communication from VCFRONT is considered irrational or missing. VCFRONT is considered not communicating on CAN for remainder of drive cycle. Pedal Monitor Warning: Torque Detected in non-torque producing gear. Pedal Monitor Warning: HVP CAN node MIA Pedal Monitor Warning: PMF CAN node is missing. The safety monitor sets this condition when CAN communication from PMF is considered irrational or missing. This alert will clear when PMF CAN data is received. PM system is unable to determine PMF state. Pedal Monitor Warning: Reset for unintended reason. This condition is set when this ECU powers on and detects an abnormal reset condition from the previous power cycle (for example, from a watchdog timeout). This alert will clear within one minute of setting. Pedal Monitor Warning: DAS CAN node is missing. The safety monitor sets this condition when CAN communication from DAS is considered irrational or missing. DAS is considered not communicating on CAN for remainder of drive cycle. Pedal Monitor Warning: UI CAN node is missing. The safety monitor sets this condition when CAN communication from UI is considered irrational or missing. UI is considered not communicating on CAN for remainder of drive cycle. Pedal Monitor Warning: PMR CAN node is missing. The safety monitor sets this condition when CAN communication from PMR is considered irrational or missing. This alert will clear when PMR CAN data is received. PM system is unable to determine PMR state. Pedal Monitor Warning: Peripheral Register Configuration Error. This condition is set when a the GPIO register of the ECU reports a configuration error, intended to be a diagnostic alert only. Pedal Monitor Warning: PM Gear Mismatch. The safety monitor sets this condition when gear stalk requests intepreted by the drive inverter are considered implausible. The safety monitor may automatically shift gear to neutral or potentially escalate to inhibiting torque production when detected. Pedal Monitor Warning: DIF CAN node MIA PM is not receiving required feedback CAN messages from DIF PM receives required feedback CAN messages from DIF Pedal Monitor Warning: Stability Control causes unintended deceleration. Pedal Monitor Warning: PM and GTW config is Inconsistent. The safety monitor sets this condition when the drive inveter component configuration mismatches with the platform configuration. Pedal Monitor Warning: ECC Protection anamoly detected. This condition is set when ECC protection detected a flash fetch or RAM read error, intended to be a diagonstic alert only. Pedal Monitor Warning: DI CAN node is missing. The safety monitor sets this condition when CAN communication from DI is considered irrational or missing. DI is considered not communicating on CAN for remainder of drive cycle. Pedal Monitor Warning: GTW CAN node is missing. The safety monitor sets this condition when CAN communication from GTW is considered irrational or missing. GTW is considered not communicating on CAN for remainder of drive cycle. Pedal Monitor Warning: Brake Pedal Error. This condition sets when BLS NO and NC circuits are considered implausible. This alert will clear when brake line switch (BLS) is considered plausible. Pedal Monitor Warning: Cross Check Failed.

Tesla alert code in the Power Management (PM) module related to dis mia.

Tesla alert code in the Power Management (PM) module related to das mia.

Tesla alert code in the Power Management (PM) module related to gtw mia.

Tesla alert code in the Power Management (PM) module related to inconsistent config.

Tesla alert code in the Power Management (PM) module related to ebr intervention.

Tesla alert code in the Power Management (PM) module. Pedal Monitor Warning: Inconsistent Vehicle Hold state. The safety monitor sets this condition when sensor or other ECU inputs into vehicle hold are deemed implausible. The safety monitor will disable vehicle hold for the remainder of the drive cycle. Pedal Monitor Warning: DI Heartbeat is missing. The safety monitor sets this condition when DI Heartbeat communication is too fast or too slow. This alert will clear when DI Heartbeat communication are considered rational. The safety monitor will initiate a unit limp condition for the remainder of the drive cycle. Pedal Monitor Warning: Excessive amount of stability control actuation.

Tesla alert code in the Power Management (PM) module related to incons autopark state.

Tesla alert code in the Power Management (PM) module. Pedal Monitor Warning: Stability Control Inhibited. The safety monitor has detected that stability control is interfering adversely with driving ability. This shall be accompanied by other stability control alerts to aid diagnosis. The safety monitor has disabled stability control. Customer facing alert that stability control is disabled. Regenerative braking and certain AP features are now disabled. Pedal Monitor Warning: Accelerator Pedal Error. The safety monitor sets this condition when accelerator pedal sensor measurements are irrational or out of bounds. This alert will clear when accelerator pedal sensor measurements are considered rational. The safety monitor will initiate a limp condition for the remainder of the drive cycle. Pedal Monitor Warning: Cruise remained on when commanded off. The safety monitor sets this condition when cruise control operation intepreted by the drive inverter is considered implausible. The safety monitor may automatically cancel cruise control operation or potentially escalate to inhibiting torque production when detected. Pedal Monitor Warning: DIR CAN node MIA PM is not receiving required feedback CAN messages from DIR PM receives required feedback CAN messages from DIR Pedal Monitor Warning: External Brake Torque Command is Invalid. The safety monitor sets this condition when sensor or other ECU inputs into EBR functionality are deemed implausible. The safety monitor will disable external braking request (EBR) for the remainder of the drive cycle. Pedal Monitor Warning: Torque Command does not match DI torque command. Pedal Monitor Warning: Stator Temperature Sensor Error. The safety monitor sets this condition when stator temperature sensor measurements are irrational or out of bounds. This alert will clear when stator temeperature sensor measurements are considered rational.

Tesla alert code in the Power Management (PM) module related to stb ctrl in wrong dir.

Tesla alert code in the Power Management (PM) module related to excessive stb ctrl trq.

Tesla alert code in the Power Management (PM) module related to unint decel stb ctrl.

Tesla alert code in the Power Management (PM) module related to stb ctrl drvr decel cflct.

Tesla alert code in the Power Management (PM) module related to vcfront mia.

Tesla alert code in the Power Management (PM) module related to ui mia.

Tesla alert code in the Power Management (PM) module. Pedal Monitor Warning:

Tesla alert code in the Power Management (PM) module related to can hardware bus b.

Tesla alert code in the Power Management (PM) module related to can data bus b.

Tesla alert code in the Power Management (PM) module related to cmp mia.

Tesla alert code in the Power Management (PM) module related to ptc mia.

Tesla alert code in the Power Management (PM) module. Pedal Monitor Warning: One Pedal Driving module inhibited. The safety monitor sets this condition when torque production error is detected while One Pedal Driving module is active. The safety monitor will disable the One Pedal Driving module for the remainder of the drive cycle. Pedal Monitor Warning: Stability Control actuated in the wrong direction. This condiiton is set when CAN communication from an offending ECU is intermittent, or fails a communication integrity check on the secondary CAN bus. Pedal Monitor Warning: ESP CAN node is missing. The safety monitor sets this condition when CAN communication from ESP is considered irrational or missing. ESP is considered not communicating on CAN for remainder of drive cycle. Pedal Monitor Fault: Torque Command Qualifier set to faulted The safety monitor sets this condition torque production error is detected

Tesla alert code in the Power Management (PM) module related to dipm version mismatch.

Tesla alert code in the Power Management (PM) module related to ecc error.

Tesla alert code in the Power Management (PM) module related to torque command inhibit.

Tesla alert code in the Power Management (PM) module related to torque intervention.

Tesla alert code in the Power Management (PM) module related to pmf mia.

Tesla alert code in the Power Management (PM) module related to pmr mia.

Tesla alert code in the Power Management (PM) module related to xtal oscillator.

Tesla fault code in the Power Management (PM) module. A drive unit torque control problem was detected with absolute torque.

Tesla fault code in the Power Management (PM) module. A drive unit torque control problem was detected with accumulated torque.

Tesla fault code in the Power Management (PM) module. A drive unit torque control problem was detected.

Tesla fault code in the Power Management (PM) module. A drive unit torque control problem was detected with regen torque.

Tesla fault code in the Power Management (PM) module. A drive unit torque control problem was detected with torque while in Neutral. When the vehicle is in Neutral, no torque is commanded to the motor. The brake must be used when shifting out of Neutral and into Drive or Reverse. When Neutral is selected, the vehicle transitions into electrical Neutral and commands zero torque to the motor by de-energizing the motor.

Tesla fault code in the Power Management (PM) module. A drive unit torque control problem was detected with an inconsistent drive unit gear selection.

Tesla fault code in the Power Management (PM) module. The Pedal Monitor (PM) has detected an internal hardware problem.

Tesla fault code in the Power Management (PM) module. The Anti-lock Braking System (ABS) Controller Area Network (CAN) node is missing (MIA).

Tesla fault code in the Power Management (PM) module. The Pedal Monitor (PM) has lost Controller Area Network (CAN) communication with the Drive Inverter (DI).

Tesla fault code in the Power Management (PM) module. The pedal monitor (PM) has detected an irrational current in the drive inverter (DI).

Tesla fault code in the Power Management (PM) module. The pedal monitor (PM) has detected a Controller Area Network (CAN) bus issue. This alert is an indication a component on the Powertrain (PT) CAN bus is overloading the CAN bus and is filling the CAN buffer. This alert may also be accompanied by other PT CAN bus alerts, including missing-in-action (MIA) alerts.

Tesla fault code in the Power Management (PM) module. The Pedal Monitor (PM) has detected an error with the accelerator pedal.

Tesla fault code in the Power Management (PM) module. The Pedal Monitor (PM) has lost Controller Area Network (CAN) communication with the shifter.

Tesla fault code in the Power Management (PM) module. There is a Controller Area Network (CAN) bus communication problem with the cruise control.

Tesla fault code in the Power Management (PM) module. The Pedal Monitor (PM) has lost Controller Area Network (CAN) communication with the brake.

Tesla fault code in the Power Management (PM) module. The Pedal Monitor (PM) is receiving irrational data from the motor encoder.

Tesla fault code in the Power Management (PM) module. The Pedal Monitor (PM) is receiving irrational stator temperature data.

Tesla fault code in the Power Management (PM) module related to mcu mia.

Tesla fault code in the Power Management (PM) module. There is an error with the vehicle's ability to regulate cruise speed.

Tesla fault code in the Power Management (PM) module. The pedal monitor (PM) detects that the cruise control state is OFF while the main switch state is ON for more than 2 seconds.

Tesla fault code in the Power Management (PM) module. The Pedal Monitor (PM) detects that the cruise control state is ON while the main switch state is OFF for more than 2 seconds.

Tesla fault code in the Power Management (PM) module. The brake pedal is functioning irrationally.

Tesla fault code in the Power Management (PM) module related to unintended reset.

Tesla fault code in the Power Management (PM) module. The Pedal Monitor (PM) has lost Controller Area Network (CAN) communication with the Drive Inverter (DI).

Tesla fault code in the Power Management (PM) module. Pedal Monitor (PM) Fault: The limp torque was exceeded.

Tesla fault code in the Power Management (PM) module. Pedal Monitor (PM) Fault: The Automatic Emergency Braking (AEB) state is inconsistent.

Tesla fault code in the Power Management (PM) module related to high stack usage.

Tesla fault code in the Power Management (PM) module. Pedal Monitor (PM) Fault: There was a Peripheral Register Configuration error.

Tesla fault code in the Power Management (PM) module. This alert indicates there was Pedal Monitor (PM) fault, and the self start-up test has failed.

Tesla fault code in the Power Management (PM) module. Pedal Monitor (PM) Fault: The brake is missing in action (MIA).

Tesla fault code in the Power Management (PM) module. Pedal Monitor Fault: CPC is missing in action (MIA).

Tesla fault code in the Power Management (PM) module. Pedal Monitor Fault: ENG is missing in action (MIA).

Tesla fault code in the Power Management (PM) module. Pedal Monitor (PM) Fault: The primary / secondary torque sign is inconsistent.

Tesla fault code in the Power Management (PM) module related to dis mia.

Tesla fault code in the Power Management (PM) module. The Pedal Monitor (PM) Controller Area Network (CAN) node is missing (MIA).

Tesla fault code in the Power Management (PM) module. This alert indicates there was Pedal Monitor (PM) fault, and the Drivers Assistance System (DAS) Controller Area Network (CAN) node is missing (MIA).

Tesla fault code in the Power Management (PM) module. The Gateway (GTW) Controller Area Network (CAN) node is missing (MIA).

Tesla fault code in the Power Management (PM) module. The Pedal Monitor (PM) and Gateway (GTW) configuration is inconsistent.

Tesla fault code in the Power Management (PM) module. Pedal Monitor (PM) Fault: The external brake torque command is invalid.

Tesla fault code in the Power Management (PM) module related to spi error.

Tesla fault code in the Power Management (PM) module related to incons vehicle hold state.

Tesla fault code in the Power Management (PM) module related to incons autopark state.

Tesla fault code in the Power Management (PM) module related to unexpected stb ctrl.

Tesla fault code in the Power Management (PM) module related to dipm version mismatch.

Tesla fault code in the Power Management (PM) module related to torque intervention.

Tesla warning code in the Power Management (PM) module. A drive unit torque control problem was detected with absolute torque.

Tesla warning code in the Power Management (PM) module. A drive unit torque control problem was detected with accumulated torque.

Tesla warning code in the Power Management (PM) module. A drive unit torque control problem was detected with unexpected torque.

Tesla warning code in the Power Management (PM) module. A drive unit torque control problem was detected with regen torque.

Tesla warning code in the Power Management (PM) module. A drive unit torque control problem was detected with the torque while in Neutral. When the vehicle is in Neutral, no torque is commanded to the motor. The brake must be used when shifting out of Neutral and into Drive or Reverse. When Neutral is selected, the vehicle transitions into electrical neutral and commands zero torque to the motor by de-energizing the motor.

Tesla warning code in the Power Management (PM) module. A drive unit torque control problem was detected with an inconsistent drive unit gear selection.

Tesla warning code in the Power Management (PM) module. The Pedal Monitor (PM) has detected an internal hardware problem.

Tesla warning code in the Power Management (PM) module. The Anti-lock Braking System (ABS) Controller Area Network (CAN) node is missing (MIA).

Tesla warning code in the Power Management (PM) module. The Pedal Monitor (PM) has lost Controller Area Network (CAN) communication with the Drive Inverter (DI).

Tesla warning code in the Power Management (PM) module. The Pedal Monitor (PM) has detected an irrational current in the Drive Inverter (DI).

Tesla warning code in the Power Management (PM) module. The Pedal Monitor (PM) has detected a Controller Area Network (CAN) bus issue. This alert is an indication that some other component on the Powertrain (PT) CAN bus is overloading the CAN bus and is filling the CAN buffer.

Tesla warning code in the Power Management (PM) module. The Pedal Monitor (PM) has detected an error with the accelerator pedal. This alert is referring to the accelerator pedal, but the pedal itself is usually not the issue.

Tesla warning code in the Power Management (PM) module. The Pedal Monitor (PM) has lost Controller Area Network (CAN) communication with the shifter.

Tesla warning code in the Power Management (PM) module. There is a Controller Area Network (CAN) bus communication problem with the cruise control.

Tesla warning code in the Power Management (PM) module. The Pedal Monitor (PM) has lost Controller Area Network (CAN) communication with the brake.

Tesla warning code in the Power Management (PM) module. The Pedal Monitor (PM) is receiving irrational data from the motor encoder.

Tesla warning code in the Power Management (PM) module. The Pedal Monitor (PM) is receiving irrational stator temperature data.

Tesla warning code in the Power Management (PM) module. There is an error with the vehicle's ability to regulate cruise speed.

Tesla warning code in the Power Management (PM) module. The Pedal Monitor (PM) detects the cruise control state is Off while the main switch state is On for more than 2 seconds.

Tesla warning code in the Power Management (PM) module. The Pedal Monitor (PM) detects the cruise control state is On while main switch state is Off for more than 2 seconds.

Tesla warning code in the Power Management (PM) module. The brake pedal is functioning irrationally.

Tesla warning code in the Power Management (PM) module related to unintended reset.

Tesla warning code in the Power Management (PM) module. The Pedal Monitor (PM) has lost Controller Area Network (CAN) communication with the Drive Inverter.

Tesla warning code in the Power Management (PM) module. Pedal Monitor (PM) Warning: The limp torque was exceeded.

Tesla warning code in the Power Management (PM) module. Pedal Monitor (PM) Warning: The Automatic Emergency Braking (AEB) is in an inconsistent state.

Tesla warning code in the Power Management (PM) module related to high stack usage.

Tesla warning code in the Power Management (PM) module. Pedal Monitor (PM) Warning: There is a peripheral register configuration error.

Tesla warning code in the Power Management (PM) module related to self test.

Tesla warning code in the Power Management (PM) module. Pedal Monitor (PM) Warning: The brake is missing in action (MIA).

Tesla warning code in the Power Management (PM) module. Pedal Monitor (PM) Warning: The CPC is missing in action (MIA).

Tesla warning code in the Power Management (PM) module. Pedal Monitor (PM) Warning: The ENG is missing in action (MIA).

Tesla warning code in the Power Management (PM) module. Pedal Monitor (PM) Warning: The Primary / Secondary torque sign is inconsistent.

Tesla warning code in the Power Management (PM) module related to dis mia.

Tesla warning code in the Power Management (PM) module related to pm mia.

Tesla warning code in the Power Management (PM) module. This alert indicates there was Pedal Monitor (PM) fault, and the Drivers Assistance System (DAS) Controller Area Network (CAN) node is missing (MIA).

Tesla warning code in the Power Management (PM) module. The Gateway (GTW) Controller Area Network (CAN) node is missing (MIA).

Tesla warning code in the Power Management (PM) module. The Pedal Monitor (PM) is seeing an inconsistency between the PM package and the Gateway (GTW) configuration.

Tesla warning code in the Power Management (PM) module related to ebr intervention.

Tesla warning code in the Power Management (PM) module related to spi error.

Tesla warning code in the Power Management (PM) module related to incons vehicle hold state.

Tesla warning code in the Power Management (PM) module related to incons autopark state.

Tesla warning code in the Power Management (PM) module related to unexpected stb ctrl.

Tesla warning code in the Power Management (PM) module related to dipm version mismatch.

Tesla warning code in the Power Management (PM) module. Pedal Monitor (PM) Warning: This alert indicates there was torque intervention.