Tesla GTW Alert Codes

Tesla diagnostic code in the Gateway (GTW) module related to replace gateway.

Tesla fault code in the Gateway (GTW) module. This alert indicates there is a thermal controller firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a high voltage (HV) battery firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. The gateway (GTW) reports a GTW firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a Drive Inverter firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a charge port firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a charger firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. This alert indicates that there is a secondary charger firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. The thermal controller (THC) firmware is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. The high voltage (HV) battery firmware is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. The gateway (GTW) firmware is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. The drive inverter (DI) firmware is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. The Charge Port (CP) platform is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. The charger firmware is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. The secondary charger firmware is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. The firmware manifest is not present on the Gateway (GTW). This alert may also be present when a new Gateway is installed.

Tesla fault code in the Gateway (GTW) module. There is a secondary drive inverter (DIS) firmware mismatch.

Tesla fault code in the Gateway (GTW) module. The secondary drive inverter (DIS) platform is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. There is a Pedal Monitor (PM) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. The Pedal Monitor (PM) firmware is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. There is a high voltage (HV) battery Complex Programmable Logic Device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a charger complex programmable logic device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a Drive Inverter (DI) Complex Programmable Logic Device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a slave charger complex programmable logic device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a secondary drive inverter (DIS) complex programmable logic device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is an electronic parking brake (EPB) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. The Electronic Parking Brake (EPB) platform is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. This alert indicates there is an electronic parking brake (EPB) module firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. The electronic parking brake (EPB) module platform is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. There is a stability control firmware version mismatch.

Tesla fault code in the Gateway (GTW) module related to ic version mismatch.

Tesla fault code in the Gateway (GTW) module related to epas version mismatch.

Tesla fault code in the Gateway (GTW) module. The phase 1 platform of the charger is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. The Gateway (GTW) has detected a platform mismatch.

Tesla fault code in the Gateway (GTW) module. The phase 3 platform of the charger is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. The phase 1 platform of the slave charger is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. This alert indicates that the phase 2 platform of the secondary charger is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. The phase 3 platform of the slave charger is configured for a different vehicle type.

Tesla fault code in the Gateway (GTW) module. There is a phase 1 charger firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a phase 2 charger firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a phase 3 charger firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a phase 1 charger complex programmable logic device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a phase 2 charger Complex Programmable Logic Device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a phase 3 charger Complex Programmable Logic Device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a phase 1 slave charger complex programmable logic device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a phase 2 slave charger complex programmable logic device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a phase 3 secondary charger Complex Programmable Logic Device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a phase 1 secondary charger Complex Programmable Logic Device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a phase 2 secondary charger Complex Programmable Logic Device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a phase 3 secondary charger Complex Programmable Logic Device (CPLD) firmware version mismatch.

Tesla fault code in the Gateway (GTW) module. There is a mismatch between the firmware manifest (master list of modules and versions expected on the vehicle) and the critical modules present on the vehicle. The gateway (GTW) does a cross-check of these and raises this alert if there is a mismatch.

Tesla fault code in the Gateway (GTW) module. There is either a firmware version mismatch or a platform mismatch, which is preventing the Gateway from allowing Drive.

Tesla fault code in the Gateway (GTW) module. There is either a version mismatch or a platform mismatch, which is preventing the Gateway from allowing charge.

Tesla fault code in the Gateway (GTW) module. There is either a firmware version mismatch or a platform mismatch, which is preventing the Gateway from allowing 12V support.

Tesla fault code in the Gateway (GTW) module related to ic platform mismatch.

Tesla fault code in the Gateway (GTW) module related to ic fpga version mismatch.

Tesla fault code in the Gateway (GTW) module related to pms version mismatch.

Tesla fault code in the Gateway (GTW) module related to pms platform mismatch.

Tesla fault code in the Gateway (GTW) module. This alert will appear when a firmware build on a module is not as expected. This might happen after a failed firmware update or a module is replaced without running a firmware update. Charging, driving and / or 12V support might be disabled while the alert is present.

Tesla fault code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the Driver Assistance System (DAS).

Tesla fault code in the Gateway (GTW) module related to esp config mismatch.

Tesla fault code in the Gateway (GTW) module related to bc config mismatch.

Tesla fault code in the Gateway (GTW) module related to esp cal version mismatch.

Tesla fault code in the Gateway (GTW) module related to bccen version mismatch.

Tesla fault code in the Gateway (GTW) module related to bcfdm version mismatch.

Tesla fault code in the Gateway (GTW) module related to bcfront version mismatch.

Tesla fault code in the Gateway (GTW) module related to bcrdm version mismatch.

Tesla fault code in the Gateway (GTW) module related to bcrear version mismatch.

Tesla fault code in the Gateway (GTW) module related to radc version mismatch.

Tesla fault code in the Gateway (GTW) module related to bccen platform mismatch.

Tesla fault code in the Gateway (GTW) module related to bcfdm platform mismatch.

Tesla fault code in the Gateway (GTW) module related to bcfront platform mismatch.

Tesla fault code in the Gateway (GTW) module related to bcrdm platform mismatch.

Tesla fault code in the Gateway (GTW) module related to bcrear platform mismatch.

Tesla fault code in the Gateway (GTW) module related to radc platform mismatch.

Tesla fault code in the Gateway (GTW) module related to ibst version mismatch.

Tesla fault code in the Gateway (GTW) module related to ibst cal mismatch.

Tesla fault code in the Gateway (GTW) module related to chgrly platform mismatch.

Tesla fault code in the Gateway (GTW) module related to bcfpm platform mismatch.

Tesla fault code in the Gateway (GTW) module related to bcfpm version mismatch.

Tesla fault code in the Gateway (GTW) module related to bcrpm platform mismatch.

Tesla fault code in the Gateway (GTW) module related to bcrpm version mismatch.

Tesla fault code in the Gateway (GTW) module related to bcs2l platform mismatch.

Tesla fault code in the Gateway (GTW) module related to bcs2c platform mismatch.

Tesla fault code in the Gateway (GTW) module related to bcs2r platform mismatch.

Tesla fault code in the Gateway (GTW) module related to bcfalcd platform mismatch.

Tesla fault code in the Gateway (GTW) module related to bcfalcd version mismatch.

Tesla fault code in the Gateway (GTW) module related to esp hw cfg mismatch.

Tesla fault code in the Gateway (GTW) module related to ibst hw cfg mismatch.

Tesla fault code in the Gateway (GTW) module related to rcm config mismatch.

Tesla fault code in the Gateway (GTW) module related to rcm version mismatch.

Tesla fault code in the Gateway (GTW) module related to rcmcal version mismatch.

Tesla fault code in the Gateway (GTW) module related to bcfalcp platform mismatch.

Tesla fault code in the Gateway (GTW) module related to bcfalcp version mismatch.

Tesla fault code in the Gateway (GTW) module related to air susp platform mismatch.

Tesla fault code in the Gateway (GTW) module related to air susp version mismatch.

Tesla fault code in the Gateway (GTW) module. This alert indicates there is a firmware mismatch of the E-fuse with the rest of the vehicles.

Tesla fault code in the Gateway (GTW) module related to efuse platform mismatch.

Tesla fault code in the Gateway (GTW) module. This alert will be raised if the gateway (GTW) sees any of the following channels reported faulted by the E-fuse via the Efuse_status message on BDY bus: EFUSE_fault_DCDCEFUSE_fault_RevBatt (This is the E-fuse on the E-fuse module connecting the 12V battery to the rest of the system)EFUSE_fault_Frunk BECEFUSE_fault_Cabin BEC This alert will prevent 12V support, high voltage (HV) Charging and Drive.

Tesla fault code in the Gateway (GTW) module related to vcseatd version mismatch.

Tesla fault code in the Gateway (GTW) module related to vcseatd platform mismatch.

Tesla fault code in the Gateway (GTW) module related to vcseatp version mismatch.

Tesla fault code in the Gateway (GTW) module related to vcseatp platform mismatch.

Tesla unknown code in the Gateway (GTW) module. The purpose of this article is to provide the definition of GTW_3V3_BMP and to serve as a reference. This article should not be used in a session.

Tesla unknown code in the Gateway (GTW) module. The Gateway has detected a charge cable in the charge port.

Tesla unknown code in the Gateway (GTW) module. This alert indicates that no key fob has been detected inside the vehicle.

Tesla unknown code in the Gateway (GTW) module. There is not enough charge in the battery for drive.

Tesla unknown code in the Gateway (GTW) module. The 12V battery is now on charge.

Tesla unknown code in the Gateway (GTW) module. The State of Charge (SOC) is too low to precondition the cabin.

Tesla unknown code in the Gateway (GTW) module. The Gateway (GTW) has that detected a door or trunk is open.

Tesla unknown code in the Gateway (GTW) module. The battery pack State of Charge (SOC) is too low. This alert will trip if the SOC minimum is below 20% and the vehicle is not charging or fast charging. When the alert is present, the Gateway (GTW) will prevent the vehicle from entering a preconditioning state.

Tesla unknown code in the Gateway (GTW) module. The charge in the 12V battery is too low for drive.

Tesla unknown code in the Gateway (GTW) module related to low12v power.

Tesla unknown code in the Gateway (GTW) module related to park to charge.

Tesla unknown code in the Gateway (GTW) module related to key missing in drive.

Tesla unknown code in the Gateway (GTW) module. The Gateway has detected that the vehicle is in Neutral. If this alert is present, the vehicle may be free-rolling.

Tesla unknown code in the Gateway (GTW) module. The customer has attempted to start the vehicle, and the media control unit (MCU) or instrument cluster (IC) is not fully up yet. The alert is usually present when the IC is still booting after wake-up, but it can also appear if there are issues with the audio starting on the center display. This alert will prevent the drive rail from turning on for 30 seconds. After 30 seconds, the vehicle will turn on the drive rail eventually, even without the IC or MCU being ready.

Tesla unknown code in the Gateway (GTW) module. This alert is triggered when the Gateway has been commanded to prevent drive rail requests.

Tesla unknown code in the Gateway (GTW) module. The vehicle is in Showroom Mode.

Tesla unknown code in the Gateway (GTW) module related to efuses not ready.

Tesla unknown code in the Gateway (GTW) module related to overheat soc too low.

Tesla unknown code in the Gateway (GTW) module related to cc fw update.

Tesla warning code in the Gateway (GTW) module related to gtw alert do not use.

Tesla warning code in the Gateway (GTW) module. Rear right tire may be flat

Tesla warning code in the Gateway (GTW) module related to task error.

Tesla warning code in the Gateway (GTW) module. Failed to write log record CAN logs may not function

Tesla warning code in the Gateway (GTW) module related to malloc hook.

Tesla warning code in the Gateway (GTW) module. Task stack overflowed

Tesla warning code in the Gateway (GTW) module related to if tx output full.

Tesla warning code in the Gateway (GTW) module related to if rx buf error.

Tesla warning code in the Gateway (GTW) module related to if pbuf alloc error.

Tesla warning code in the Gateway (GTW) module related to late task.

Tesla warning code in the Gateway (GTW) module related to wd task count.

Tesla warning code in the Gateway (GTW) module related to cancore watchdog.

Tesla warning code in the Gateway (GTW) module related to maincore watchdog.

Tesla warning code in the Gateway (GTW) module. There is a Gateway (GTW) firmware version mismatch.

Tesla warning code in the Gateway (GTW) module. APS may not function properly

Tesla warning code in the Gateway (GTW) module. DIF may not function properly

Tesla warning code in the Gateway (GTW) module. BLEEPCENTER is running different version than the expected BLEEPCENTER may not function properly

Tesla warning code in the Gateway (GTW) module. BMS may not function properly

Tesla warning code in the Gateway (GTW) module. CMP may not function properly

Tesla warning code in the Gateway (GTW) module. CP may not function properly

Tesla warning code in the Gateway (GTW) module. DIR may not function properly

Tesla warning code in the Gateway (GTW) module. EPAS3P is running different version than the expected EPAS3P may not function properly

Tesla warning code in the Gateway (GTW) module related to epb lversion mismatch.

Tesla warning code in the Gateway (GTW) module related to epb rversion mismatch.

Tesla warning code in the Gateway (GTW) module. ESP may not function properly

Tesla warning code in the Gateway (GTW) module. ESPCAL is running different version than the expected ESPCAL may not function properly TPMS is running different version than the expected TPMS may not function properly

Tesla warning code in the Gateway (GTW) module related to gt wversion mismatch.

Tesla warning code in the Gateway (GTW) module. HVP may not function properly

Tesla warning code in the Gateway (GTW) module related to ibs tversion mismatch.

Tesla warning code in the Gateway (GTW) module. IBSTCAL is running different version than the expected IBSTCAL may not function properly I2C bus failed. I2C will be reset Fatfs FAT area is corrupted. Format needed IBST is running different version than the expected IBST may not function properly CP is running different version than the expected Ethernet interface receive buffer error A reboot for update occurred but the Updater did not run Software update is attempted to initiate PCS is running different version than the expected CBC is running different version than the expected Log queue is full or SD card having problems May clear itself after burstiness or Format SD card Bus failed to sleep when commanded CMPS is running different version than the expected Thermal system may not function properly Setting of RTC alarm failed. GTW will remain awake CMP is running different version than the expected PARK is running different version than the expected PARK may not function properly Fault Confinement is passive or bus off. Communication on VEH bus may fail SD card is at its max rated program/erase cycles SD card at its max rated program/erase cycles SD card may enter read-only mode preventing logging, updates etc. Exception on Gateway CPU occurred Invalid number of tasks running Indicates an electrical issue with the CAN bus. Note: GTW hardware hwid=1 does not support reporting of this alert CH bus has abnormal load (>70%) A rogue ECU or unexpected event Some messages on CH bus may be dropped

Tesla warning code in the Gateway (GTW) module related to ocs1pversion mismatch.

Tesla warning code in the Gateway (GTW) module related to par kversion mismatch.

Tesla warning code in the Gateway (GTW) module. PCS may not function properly

Tesla warning code in the Gateway (GTW) module. Broadcasted version does not correspond to the manifest PCSCPU2 is running different version than the expected PCSCPU2 may not function properly Identify a problem in the SD Card driver layer BMP did not respond to pings for 2 minutes. It will be power cycled. Communication failure between Gateway and BMP Communication re-established after BMP reboot UI and connectivity will not function HCML is running different version than the expected HCML may not function properly

Tesla warning code in the Gateway (GTW) module. PMR may not function properly Front right tire may be flat

Tesla warning code in the Gateway (GTW) module. PMF may not function properly

Tesla warning code in the Gateway (GTW) module. PTC may not function properly

Tesla warning code in the Gateway (GTW) module related to rad cversion mismatch.

Tesla warning code in the Gateway (GTW) module. RCM may not function properly SD Card File System Corrupted

Tesla warning code in the Gateway (GTW) module. RCMCAL is running different version than the expected RCMCAL may not function properly Failed to write an MDIO switch register SD Card boot sector is corrupted Gateway file system driver detects corruption in SD card boot sector CAN logs and firmware updates might not function Couldn't communicate with the SD Card. SD Card will be reinited

Tesla warning code in the Gateway (GTW) module related to scc mversion mismatch.

Tesla warning code in the Gateway (GTW) module related to vcse cversion mismatch.

Tesla warning code in the Gateway (GTW) module. TAS may not function properly

Tesla warning code in the Gateway (GTW) module. THS may not function properly

Tesla warning code in the Gateway (GTW) module related to tpm sversion mismatch.

Tesla warning code in the Gateway (GTW) module. VCFRONT is running different version than the expected VCFRONT may not function properly EPAS3S_sysStatus was missed for 5 cycle time while the car is in drive HW or SW failure in EPAS3S or in the communication path between Gateway Reboot EPAS3S, Gateway first. Then replace EPAS3S if not resolved Power Assist Steering/Autosteering will not function RADC is running different version than the expected RADC may not function properly iBooster stuck in continuous braking Brake pedal switch may be improperly installed or 12V issues Verify brake pedal switch installation. IBST/Gateway reboot Software update failure or brake pedal issues Gateway is in factory mode. Service visit required. Fails to set prod gating before delivery Configure Gateway factory gating at Service Could not log CAN message. Queue full. PMR is running different version than the expected

Tesla warning code in the Gateway (GTW) module. VCLEFT is running different version than the expected VCLEFT may not function properly

Tesla warning code in the Gateway (GTW) module. VCRIGHT is running different version than the expected VCRIGHT may not function properly EBuck config set, vehicle speed and torque limited Provision to remove ebuck configuration Vehicle should not be driven, vehicle speed and torque limited VCSEC is running different version than the expected VCSEC may not function properly EPBR is running different version than the expected EPBR may not function properly

Tesla warning code in the Gateway (GTW) module. EPAS3S is running different version than the expected EPAS3S may not function properly Communication on CH bus may fail PMF is running different version than the expected PARTY bus has abnormal load (>70%) Some messages on PARTY bus may be dropped A task did not execute in time based on its cycle time A UDS diagnostic message has been rejected Un-whitelisted UDS message received by Gateway Automatically cleared at 5s after alert is set UDS communication may not function HCMR is running different version than the expected HCMR may not function properly System may not function properly

Tesla warning code in the Gateway (GTW) module. Version manifest is corrupted

Tesla warning code in the Gateway (GTW) module related to sd card init failure.

Tesla warning code in the Gateway (GTW) module. Gateway file system driver detects corruption Rear left tire may be slightly underinflated or leaking CAN over ETH transmit queue full

Tesla warning code in the Gateway (GTW) module related to if tx spans.

Tesla warning code in the Gateway (GTW) module related to bus sleep failure.

Tesla warning code in the Gateway (GTW) module related to opc rversion mismatch.

Tesla warning code in the Gateway (GTW) module related to opc fversion mismatch.

Tesla warning code in the Gateway (GTW) module related to i2c failure.

Tesla warning code in the Gateway (GTW) module related to rtc alarm failure.

Tesla warning code in the Gateway (GTW) module related to in factory mode.

Tesla warning code in the Gateway (GTW) module. Vulnerable to security risks

Tesla warning code in the Gateway (GTW) module related to bmp sleep failure.

Tesla warning code in the Gateway (GTW) module related to bmp watchdog.

Tesla warning code in the Gateway (GTW) module. CAN failure on VEH bus Gateway reboot / sleep cycle

Tesla warning code in the Gateway (GTW) module. CAN failure on CH bus

Tesla warning code in the Gateway (GTW) module. CAN failure on PARTY bus Front left tire may be flat

Tesla warning code in the Gateway (GTW) module. Exception occurred. Gateway reset

Tesla warning code in the Gateway (GTW) module related to tcp debug.

Tesla warning code in the Gateway (GTW) module. Message dropped by TCP stack Software update

Tesla warning code in the Gateway (GTW) module related to diskio err.

Tesla warning code in the Gateway (GTW) module. Issue while dumping HRL data

Tesla warning code in the Gateway (GTW) module. Issue with triggering HRL

Tesla warning code in the Gateway (GTW) module. OTA update failed Failure to update ECU(s)

Tesla warning code in the Gateway (GTW) module. Steering wheel reset detected Steering wheel reset applied System restarts

Tesla warning code in the Gateway (GTW) module related to epas3p mia.

Tesla warning code in the Gateway (GTW) module related to epas3s mia.

Tesla warning code in the Gateway (GTW) module related to eth interface reset.

Tesla warning code in the Gateway (GTW) module. GTW or BMP power cycle

Tesla warning code in the Gateway (GTW) module related to ve hbus overloaded.

Tesla warning code in the Gateway (GTW) module related to part ybus overloaded.

Tesla warning code in the Gateway (GTW) module. Gateway reboot

Tesla warning code in the Gateway (GTW) module related to uds message rejected.

Tesla warning code in the Gateway (GTW) module. Format SD card

Tesla warning code in the Gateway (GTW) module related to uds msg dropped by tcp stack.

Tesla warning code in the Gateway (GTW) module related to can frame dropped.

Tesla warning code in the Gateway (GTW) module related to i booster stuck.

Tesla warning code in the Gateway (GTW) module. Offboard Charger Update error

Tesla warning code in the Gateway (GTW) module. Charging will not function

Tesla warning code in the Gateway (GTW) module related to sd card inv req parallel.

Tesla warning code in the Gateway (GTW) module related to sd card watchdog.

Tesla warning code in the Gateway (GTW) module related to ocu failed.

Tesla warning code in the Gateway (GTW) module. Low task stack detected

Tesla warning code in the Gateway (GTW) module related to sd card inv req zero.

Tesla warning code in the Gateway (GTW) module. Ethernet interface transmit queue full

Tesla warning code in the Gateway (GTW) module. An ethernet interface reset has occurred Communication on PARTY bus may fail

Tesla warning code in the Gateway (GTW) module. Fatfs thinks it is full

Tesla warning code in the Gateway (GTW) module related to sd card fat corrupted.

Tesla warning code in the Gateway (GTW) module related to hcm lversion mismatch.

Tesla warning code in the Gateway (GTW) module related to hcm rversion mismatch.

Tesla warning code in the Gateway (GTW) module. SWC may not function properly

Tesla warning code in the Gateway (GTW) module. CBC may not function properly

Tesla warning code in the Gateway (GTW) module related to switch watchdog.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the Electronic Parking Brake (EPB) module.

Tesla warning code in the Gateway (GTW) module. The SD Card was formatted

Tesla warning code in the Gateway (GTW) module. EPAS3P_sysStatus was missed for 5 cycle time while the car is in drive HW or SW failure in EPAS3P or in the communication path between Gateway Reboot EPAS3P, Gateway first. Then replace EPAS3P if not resolved Generic task error. The task has been stopped VEH bus has abnormal load (>70%) Some messages on VEH bus may be dropped SWC is running different version than the expected PTC is running different version than the expected

Tesla warning code in the Gateway (GTW) module related to e buck configured.

Tesla warning code in the Gateway (GTW) module. BLEEPLEFT is running different version than the expected BLEEPLEFT may not function properly

Tesla warning code in the Gateway (GTW) module. BLEEPRIGHT is running different version than the expected BLEEPRIGHT may not function properly Failed to properly initialize the switch. Might see erratic network behavior

Tesla warning code in the Gateway (GTW) module. BLEEPREAR is running different version than the expected BLEEPREAR may not function properly No cancore heartbeat for 5 seconds Ethernet interface buffer allocation failed THS is running different version than the expected Checksum of firmware manifest stored in Gateway is invalid Drive/Charge/12V-support will be inhibited TAS is running different version than the expected Warns if the CP node is mia on HVS CAN The CP node is not mia on HVS CAN CAN messages are not received from CP node

Tesla warning code in the Gateway (GTW) module. Software mismatch

Tesla warning code in the Gateway (GTW) module related to read mdio failed.

Tesla warning code in the Gateway (GTW) module related to write mdio failed.

Tesla warning code in the Gateway (GTW) module related to z4b disabled.

Tesla warning code in the Gateway (GTW) module. An unrecognized CAN message was received Unexpected message received potentially by ECU running different version Gateway reboot or Software update ECUs may not communicate expectedly

Tesla warning code in the Gateway (GTW) module. Update automatically retried

Tesla warning code in the Gateway (GTW) module. HRL Event File available

Tesla warning code in the Gateway (GTW) module related to switch init failed.

Tesla warning code in the Gateway (GTW) module related to unexpected destructive reset status.

Tesla warning code in the Gateway (GTW) module related to unexpected functional reset status.

Tesla warning code in the Gateway (GTW) module. Network switch is unlocked

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware mismatch on the DCDC converter.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the Instrument Cluster (IC).

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the Electric Power Assist Steering (EPAS).

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the positive temperature coefficient (PTC) air heater.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the Remote Climate Control Module (RCCM).

Tesla warning code in the Gateway (GTW) module. The gateway (GTW) reports that the radio tuner has a firmware version mismatch.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the radio tuner. The tuners are suppose to be pre-flashed.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the radio tuner. The tuners are suppose to be pre-flashed.

Tesla warning code in the Gateway (GTW) module. Possible FATFS corruption

Tesla warning code in the Gateway (GTW) module related to can log queue full.

Tesla warning code in the Gateway (GTW) module. HRL game mode file available

Tesla warning code in the Gateway (GTW) module. Low HEAP detected

Tesla warning code in the Gateway (GTW) module. SD card replaced

Tesla warning code in the Gateway (GTW) module related to cmp dversion mismatch.

Tesla warning code in the Gateway (GTW) module related to cancore heartbeat.

Tesla warning code in the Gateway (GTW) module. Sniff system error

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the front passenger side door handle.

Tesla warning code in the Gateway (GTW) module related to possible can wake issue.

Tesla warning code in the Gateway (GTW) module. HRL state machine error

Tesla warning code in the Gateway (GTW) module. Car configuration not written

Tesla warning code in the Gateway (GTW) module. Powertrain configuration change detected. Potentially a 3rd party device installed that modifies the powertrain performance DI_performancePackage incorrect DI_performancePackage corresponds the configuration Potential risk of damage or shutdown HVP is running different version than the expected Request can potentially cause sdcard corruption CMPD is running different version than the expected HVAC/thermal system may not function properly Offboard Charger Update failed

Tesla warning code in the Gateway (GTW) module related to update abort for12v.

Tesla warning code in the Gateway (GTW) module. RTC time set in the past

Tesla warning code in the Gateway (GTW) module. Failed to use external RTC as wake source. Will try internal RTC RCM is running different version than the expected

Tesla warning code in the Gateway (GTW) module. There has been an issue in providing support to the low voltage (LV) bus, and the voltage has dropped below the target. This can be caused by: Wiring issues between the DCDC and rest of vehicle on LV harness (B+ or ground).Loose 12V battery positive or negative connections at either end of the harness.No LV support provided due to low Battery Management System (BMS) State of Charge (SOC).No LV support provided due to BMS issues.No LV support provided due to DCDC issues.No LV support provided due to E-fuse DCDC fuse tripped.DCDC is not enabled by the BMS or E-fuse.Controller area network (CAN) bus issues with PT or BDY. This alert does not mean the 12V battery is bad. It means the vehicle is not adequately supporting the 12V battery and LV system.

Tesla warning code in the Gateway (GTW) module. The Gateway has a controller area network (CAN) bus communication error with phase 1 of the charger.

Tesla warning code in the Gateway (GTW) module. The Gateway has a controller area network (CAN) bus communication error with phase 2 of the charger.

Tesla warning code in the Gateway (GTW) module. The Gateway has a controller area network (CAN) bus communication error with phase 3 of the charger.

Tesla warning code in the Gateway (GTW) module. The Gateway has a controller area network (CAN) bus communication error with the phase 1 of the slave charger.

Tesla warning code in the Gateway (GTW) module. The Gateway has a controller area network (CAN) bus communication error with phase 2 of the slave charger.

Tesla warning code in the Gateway (GTW) module related to n err can fault veh.

Tesla warning code in the Gateway (GTW) module related to n err can fault ch.

Tesla warning code in the Gateway (GTW) module related to n err can fault party.

Tesla warning code in the Gateway (GTW) module. Front left tire may be slightly underinflated or leaking

Tesla warning code in the Gateway (GTW) module. Front right tire may be slightly underinflated or leaking

Tesla warning code in the Gateway (GTW) module related to tpm ssoft warn rear left.

Tesla warning code in the Gateway (GTW) module. Rear right tire may be slightly underinflated or leaking TCP issue detected. See alert data. SCCM is running different version than the expected SCCM may not function properly DIF is running different version than the expected OCS1P is running different version than the expected OCS1P may not function properly A received UDP command to disable a feature failed

Tesla warning code in the Gateway (GTW) module. Indicates an electrical issue with the CAN bus. Note: GTW hardware hwid=10 and hwid=1 do not support reporting of this alert Possible problem waking on CAN Indicates an electrical issue with the CAN bus

Tesla warning code in the Gateway (GTW) module. The BMP PMIC has reached an error state The BMP-GTW-PMIC-ERROR I/O has reached an error state The BMP may not function properly OPCF is running different version than the expected OPCF may not function properly EPBL is running different version than the expected EPBL may not function properly

Tesla warning code in the Gateway (GTW) module. Rear left tire may be flat

Tesla warning code in the Gateway (GTW) module. BMS is running different version than the expected Failed to read an MDIO switch register

Tesla warning code in the Gateway (GTW) module. The 12V battery voltage has dropped below 10.5V for at least 5 seconds. If this alert is present, the 12V battery has likely become damaged through excessive discharge and should be replaced. The root cause of this damage should also be diagnosed and repaired to prevent future occurrences in the new battery. The flooded batteries used on Model X vehicles are especially sensitive to deep discharge, which can result in failures developing weeks or months later even if the battery looks fine initially.

Tesla warning code in the Gateway (GTW) module. The Gateway (GTW) is complaining about a state mismatch between the drive rail requested and the current one sensed. There are three scenarios that can cause this alert to appear: The Drive Rail was requested "On" by the Gateway, but it is stuck in the "Off" state. This is possibly due to a relay that will not unlatch. The Drive Rail was requested "On" when it is already in the "On" state. This is most likely a bad sense lead in the Gateway.The Drive Rail was requested "Off" and it is stuck in the "On" state. This is possibly due to a relay that will not unlatch?.

Tesla warning code in the Gateway (GTW) module. The Adaptive Cruise Control (ACC) rail voltage does not match what the vehicle is expecting. There are three scenarios that can cause this alert to appear: The ACC rail was requested "On" by the Gateway, but it is stuck in the "Off" state. This is possibly due to a relay that will not unlatch.The ACC rail was requested "On" when it is already in the "On" state. This is most likely a bad sense lead in the Gateway.The ACC rail was requested "Off" and it is stuck in the "On" state. This is possibly due to a relay that will not unlatch?.

Tesla warning code in the Gateway (GTW) module. The measured Heating, Ventilation, Air-Conditioning (HVAC) rail voltage does not match the expected state of the HVAC rail (i.e. the HVAC rail is on, but the voltage measured is not within 2V of the 12V reference rail).

Tesla warning code in the Gateway (GTW) module. This indicates there are Diagnostic Trouble Codes (DTCs) present for the Park Assist system.

Tesla warning code in the Gateway (GTW) module. The Park Assist system has detected a fault that prevents it from operating as expected.

Tesla warning code in the Gateway (GTW) module related to df hnd mia.

Tesla warning code in the Gateway (GTW) module. Exterior door handles present but will not unlatch door lock to enter vehicle. See video:

Tesla warning code in the Gateway (GTW) module. The passenger (pf) front door handle (Hnd) is missing (MIA).

Tesla warning code in the Gateway (GTW) module related to swr precaution.

Tesla warning code in the Gateway (GTW) module. The Phase 1 platform of the charger is configured for a different vehicle type.

Tesla warning code in the Gateway (GTW) module. The Phase 2 platform of the charger is configured for a different vehicle type.

Tesla warning code in the Gateway (GTW) module. The Phase 3 platform of the charger is configured for a different vehicle type.

Tesla warning code in the Gateway (GTW) module. The Phase 1 platform of the slave charger is configured for a different vehicle type.

Tesla warning code in the Gateway (GTW) module. The Phase 2 platform of the slave charger is configured for a different vehicle type.

Tesla warning code in the Gateway (GTW) module. The Phase 3 platform of the slave charger is configured for a different vehicle type.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on Phase 1 of the charger.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on Phase 2 of the charger.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on Phase 3 of the charger.

Tesla warning code in the Gateway (GTW) module. There is a Phase 1 slave charger complex programmable logic device (CPLD) firmware version mismatch.

Tesla warning code in the Gateway (GTW) module. There is a Phase 2 slave charger Complex Programmable Logic Device (CPLD) firmware version mismatch.

Tesla warning code in the Gateway (GTW) module. There is a Phase 3 slave charger Complex Programmable Logic Device (CPLD) firmware version mismatch.

Tesla warning code in the Gateway (GTW) module. There is a Park Assist firmware version mismatch.

Tesla warning code in the Gateway (GTW) module. The left seat heater is not working.

Tesla warning code in the Gateway (GTW) module. The right seat heater is not working.

Tesla warning code in the Gateway (GTW) module. The left rear seat heater is not working.

Tesla warning code in the Gateway (GTW) module. The center rear seat heater is not working.

Tesla warning code in the Gateway (GTW) module. There is a rear right seat heater failure.

Tesla warning code in the Gateway (GTW) module. There is a Homelink communication error. It is intended to flag miscommunications with the Homelink module before it fails entirely. It is not displayed to customers and can be disregarded. If the Homelink module is in fact not communicating at all, GTW_w049_homelinkMia will also be set, which can be relied upon.

Tesla warning code in the Gateway (GTW) module. switch OTP incorrect

Tesla warning code in the Gateway (GTW) module related to cmp sversion mismatch.

Tesla warning code in the Gateway (GTW) module related to rsr wdrs sleep.

Tesla warning code in the Gateway (GTW) module. The Gateway sets the hard pressure thresholds during firmware updates. When the tire pressure monitoring system (TPMS) reset function is used from the center display, it does not edit the soft pressure thresholds. This alert has been found at unexpected times during vehicle use, but this alert is not currently displayed to the customer.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is firmware version mismatch on the Digital Audio Broadcasting (DAB) tuner.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected a problem with the memory seat module (MSM) indicating either a warning or failure from the MSM. One or more of the memory seat functions will be impaired if this alert is present.

Tesla warning code in the Gateway (GTW) module related to sd or log issue.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the air suspension.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is firmware version mismatch on the Gen 2 A/C compressor.

Tesla warning code in the Gateway (GTW) module. The Gateway shall set this alert to 1 when it is unable to receive controller area network (CAN) data from the CAN enabled compressor. The compressor should send data when:The compressor is enabled in internal.dat (compressorType 1).The HVAC rail is on.The contactors are closed.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the pedal monitor.

Tesla warning code in the Gateway (GTW) module related to pms mia.

Tesla warning code in the Gateway (GTW) module. This alert is set when the CAN_ECR (controller area network error counter) register has been set at least 8 times within 1 second and the Instrument Cluster (IC) is on. It indicates there is a communication problem with sending and receiving messages on the Chassis CAN bus. It will clear after 30 seconds if the fault condition is eliminated.

Tesla warning code in the Gateway (GTW) module. The Continental Tire Pressure Monitoring System (TPMS) electronic control unit (ECU) uses an End-of-Line (EOL) routine to check the functionality of the system and the sensors. This is triggered in Service when Toolbox 2.0 is used to program Continental TPMS. During this process, Toolbox sends the sensor IDs to the ECU along with the proper recommended cold pressure (RCP) values so the ECU can calculate the thresholds for the vehicle configuration. When the Toolbox routine is complete, the ECU enters EOL mode and this alert appears. A test drive is needed in order for the ECU to learn the sensor IDs and compare them to what was entered using Toolbox. The EOL routine will only finish if the sensor IDs entered into Toolbox match the sensor IDs that the ECU reads during the test drive. ?For this reason, it is critical that the tool is reading properly, and possible causes should be explored if the ATEQ tool is not reading properly.

Tesla warning code in the Gateway (GTW) module. This alert is present is triggered due to a firmware exception in the Gateway, which is similar to a watchdog reset.

Tesla warning code in the Gateway (GTW) module. Gateway firmware with version 5.11 or later will reset the Ethernet interface if the Tegra Instrument Cluster (IC) and Center Information Display (CID / Media Control Unit (MCU) Tegra) are both missing (MIA) for one minute.

Tesla warning code in the Gateway (GTW) module. The temperature measured at the 12V battery negative post is too high. This alert is asserted if the reported 12V battery temperature is greater than 50�C for 5 seconds. It is cleared if the reported 12V battery temperature is ever sampled at less than 45�C.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the Driver Assistance System (DAS).

Tesla warning code in the Gateway (GTW) module. The gateway has detected that the driver assistance system (DAS) camera's controller area network (CAN) node is missing.

Tesla warning code in the Gateway (GTW) module related to boot sector write.

Tesla warning code in the Gateway (GTW) module related to esp cal version mismatch.

Tesla warning code in the Gateway (GTW) module related to tpms version mismatch.

Tesla warning code in the Gateway (GTW) module related to bccen version mismatch.

Tesla warning code in the Gateway (GTW) module. There is a version mismatch with the body control module for the front driver's door.

Tesla warning code in the Gateway (GTW) module related to bcfront version mismatch.

Tesla warning code in the Gateway (GTW) module related to bcrdm version mismatch.

Tesla warning code in the Gateway (GTW) module related to bcrear version mismatch.

Tesla warning code in the Gateway (GTW) module related to radc version mismatch.

Tesla warning code in the Gateway (GTW) module related to is ebuck.

Tesla warning code in the Gateway (GTW) module related to bcrdm mia.

Tesla warning code in the Gateway (GTW) module related to bcrear mia.

Tesla warning code in the Gateway (GTW) module. The Gateway is unable to receive controller area network (CAN) data from the iBooster.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the iBooster (IBST).

Tesla warning code in the Gateway (GTW) module related to ibst cal mismatch.

Tesla warning code in the Gateway (GTW) module. This alert indicates that the iBooster (IBST) controller area network (CAN) status message has gone to "failure," which means that a critical IBST alert has been set.

Tesla warning code in the Gateway (GTW) module related to ped pro event.

Tesla warning code in the Gateway (GTW) module. This alert is a workaround for SD card boot sector corruption.

Tesla warning code in the Gateway (GTW) module related to boot sector corrupted.

Tesla warning code in the Gateway (GTW) module related to chgrly platform mismatch.

Tesla warning code in the Gateway (GTW) module related to chgrly version mismatch.

Tesla warning code in the Gateway (GTW) module. This alert indicates that the vehicle is unable to charge the 12V battery because of the following: The HV battery State of Charge (SOC) is 6% or below, and 12V support is disabled at this value.?The Gateway cannot determine the SOC of the high voltage (HV) battery pack. This is a rare firmware bug that is being addressed. In this state, the 12V battery will dischage until the Battery Management System (BMS) state changes and the SOC_min is read by the Gateway (BMS_state will no longer be SNA).

Tesla warning code in the Gateway (GTW) module. This indicates that the brake disk wipe (BDW) system was activated. It is logged to understand how often it is activated in the field. Brake disk wiping actuates the brakes under certain temperature conditions and should not be customer facing.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that the iBooster functionality has been reduced. If this alert is present, the power brake assist will be reduced.

Tesla warning code in the Gateway (GTW) module related to bcfpm version mismatch.

Tesla warning code in the Gateway (GTW) module related to bcrpm version mismatch.

Tesla warning code in the Gateway (GTW) module related to bcs2l version mismatch.

Tesla warning code in the Gateway (GTW) module related to bcs2c version mismatch.

Tesla warning code in the Gateway (GTW) module related to bcs2r version mismatch.

Tesla warning code in the Gateway (GTW) module related to bcfalcd version mismatch.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there has been a temporary failure of the park assist feature. If this alert is present, there may be a blocked sensor.

Tesla warning code in the Gateway (GTW) module related to tuner hd version mismatch.

Tesla warning code in the Gateway (GTW) module related to firmware rc incomplete.

Tesla warning code in the Gateway (GTW) module. The Restraint Control Module is reporting to the Gateway that airbags are not armed.

Tesla warning code in the Gateway (GTW) module related to th bus config mismatch.

Tesla warning code in the Gateway (GTW) module related to rcm near deploy.

Tesla warning code in the Gateway (GTW) module related to bcfalcp version mismatch.

Tesla warning code in the Gateway (GTW) module related to rcm driver orient mismatch.

Tesla warning code in the Gateway (GTW) module. The battery management system (BMS) constantly measures or calculates the resistance across the pack contactors by looking at the voltage difference when the current is stable between the battery side and vehicle side of the power switches. The current is always fluctuating at the power switches, meaning the measurement is never perfect, and the BMS associates a confidence index to each measurement. The more stable the current and the longer it is stable, the higher the confidence index will be. ? The Gateway will report this alert and start a log upload when: The confidence index is on the lower side (but still acceptable) and the power switch (either positive or negative) resistance measurement is above 1.5mohms. The confidence index is good (more confidence in the measurement) and the power switch (either positive or negative) resistance measurement is above 1.0mohms. In parallel, the BMS also calculates the contactors stress, which directly relates to the contactors impedance. There cannot be stress without impedance.

Tesla warning code in the Gateway (GTW) module related to air susp platform mismatch.

Tesla warning code in the Gateway (GTW) module related to air susp version mismatch.

Tesla warning code in the Gateway (GTW) module related to snscll1version mismatch.

Tesla warning code in the Gateway (GTW) module related to snscll1platform mismatch.

Tesla warning code in the Gateway (GTW) module related to snsclr1version mismatch.

Tesla warning code in the Gateway (GTW) module related to snsclr1platform mismatch.

Tesla warning code in the Gateway (GTW) module related to snscul1version mismatch.

Tesla warning code in the Gateway (GTW) module related to snscul1platform mismatch.

Tesla warning code in the Gateway (GTW) module related to snscur1version mismatch.

Tesla warning code in the Gateway (GTW) module related to snscur1platform mismatch.

Tesla warning code in the Gateway (GTW) module related to bccen mia.

Tesla warning code in the Gateway (GTW) module related to bcfront mia.

Tesla warning code in the Gateway (GTW) module. This alert can trip when the Long-Term Evolution (LTE) modem power is out of specification.

Tesla warning code in the Gateway (GTW) module. This alert will appear on when one of the following: The 12V electronics draw too much sleep current from the 12v battery.The Gateway is prevented from sleeping even though it has entered the discharge 12V state. The thresholds for the above conditions are as follows: More than 100mA of sleep current. Unable to sleep for more than 1 hour.

Tesla warning code in the Gateway (GTW) module related to blebase version mismatch.

Tesla warning code in the Gateway (GTW) module related to snsus version mismatch.

Tesla warning code in the Gateway (GTW) module. This alert will appear if the status of the front trunk switch goes into an ambiguous state. Ambiguous state for the switch means the body controller (BCM - Model S and BCFRONT - Model X) sent a valid command to the front trunk latch but did not detected that the front trunk latch switch transitioned to OPEN state. A valid command means all preconditions were OK, and the module applied power to the latch. ??If this alert is present, Cruise Control will be disabled on Drivers Assistance System (DAS) vehicles (article 20365). The alert will clear itself after a successful release cycle: if the primary latch switch transits from CLOSED to OPEN state within 200ms following a release request.

Tesla warning code in the Gateway (GTW) module. On rev E Media Control Units (MCUs), the MCU is capable of detecting the status of connection to the microphones by measuring the MIC-DIAG voltages. This alert is set when the voltage is out of spec (< 200mV for short-circuit, > 1200mV for open-circuit)?? in any of the four failure modes (L-open, L-short, R-open, R-short).

Tesla warning code in the Gateway (GTW) module. If the E-fuse module is not communicating when the accessory rail is on, this alert will be set.

Tesla warning code in the Gateway (GTW) module. This alert is set when the firmware version of the E-fuse does not match the firmware version of the vehicle.

Tesla warning code in the Gateway (GTW) module related to efuse platform mismatch.

Tesla warning code in the Gateway (GTW) module related to epas3s mia.

Tesla warning code in the Gateway (GTW) module related to epas3s version mismatch.

Tesla warning code in the Gateway (GTW) module related to epas3p mia.

Tesla warning code in the Gateway (GTW) module. This alert is set if the DAS_chNm message is missing on the controller area network (CAN) bus.

Tesla warning code in the Gateway (GTW) module related to epas3p version mismatch.

Tesla warning code in the Gateway (GTW) module. This alert may be present on vehicles running firmware version 17.28.103 or later. This alert appears when the following conditions are present: Passive Entry is disabled. The drive rail is OFF, and the vehicle is not started.No key fob unlock command was seen by the vehicle in the last 5 minutes If the vehicle is remotely unlocked, this alert will also be displayed when the vehicle is not started within 5 minutes.

Tesla warning code in the Gateway (GTW) module. The Electronic Stability Program (ESP) pump increases hydraulic pressure if the pad friction is compromised (brake fade, ice buildup, etc.) The Hydraulic Fade Compensation (HFC) is designed to help generate brake force in conditions where the brake effectiveness may be reduced due to abnormal environmental circumstances. Traditionally, this function was used for the case of overheating during steep mountain descents. However, Tesla has refined the concept for use in cold and wet conditions. Under extreme weather conditions where the brake rotors and pads may be subject to excess water, a water film on the brake surfaces could momentarily decrease the performance of the brakes. Road salts that are used in some winter climates to prevent ice formation can have a mild lubricant effect that may further degrade brake performance. In such conditions, the HFC monitors the brake system pressure and ABS-activity to identify instances of low brake performance. Additionally, brake force can be generated by running the hydraulic pump used for stability control functions. If the HFC is triggered during heavy braking, the driver may feel a slight drop in brake pedal position, ABS-like pulsation through the brake pedal, and a surge in vehicle braking. This is normal and indicates the HFC-function is activated. The Amber ABS-active light will also flash during HFC operation. ? Customer Facing Impact: If the brake effectiveness is reduced and the brake pedal is pushed hard enough to trigger HFC, the customer will feel lower braking performance until the HFC system is activated at which point they will feel a significant increase in braking power and reduction in vehicle speed.Customers will also feel the brake pedal pulled away from their foot??. This alert can be expected under certain environmental conditions as described in owners manual under the topic "Hydraulic Fade Compensation." If these environmental conditions are not met or brake performance does not regain to normal operation, pursue possible causes to investigate further.

Tesla warning code in the Gateway (GTW) module. This is warning intended to indicate that the Brake Disk Wipe feature has been compromised.

Tesla warning code in the Gateway (GTW) module. The high voltage (HV) battery state of charge (SOC) is too low to support the 12V battery. The 12V battery will be unsupported until the HV battery SOC increases.

Tesla warning code in the Gateway (GTW) module related to cc fw update failure.

Tesla warning code in the Gateway (GTW) module. This alert is triggered on Info-Tegra vehicles when the Gateway is not fused.

Tesla warning code in the Gateway (GTW) module related to in factory mode.

Tesla warning code in the Gateway (GTW) module. The Gateway has detected that there is a firmware version mismatch on the oil pump slave attached to the front drive unit (OPCS).

Tesla warning code in the Gateway (GTW) module related to vcseatd mia.

Tesla warning code in the Gateway (GTW) module related to vcseatp mia.

Tesla warning code in the Gateway (GTW) module related to vcseatd version mismatch.

Tesla warning code in the Gateway (GTW) module related to vcseatd platform mismatch.

Tesla warning code in the Gateway (GTW) module related to vcseatp version mismatch.

Tesla warning code in the Gateway (GTW) module related to vcseatp platform mismatch.

Tesla warning code in the Gateway (GTW) module related to ungraceful game mode exit.

Tesla warning code in the Gateway (GTW) module. This alert is set when the driver front door handle fails. The alert is universal for all generations of door handles but depending on the door handle generation installed, this alert is triggered for different reasons.

Tesla warning code in the Gateway (GTW) module. This alert is set when the driver rear door handle failed. The alert is universal for all generations of door handles but depending on the door handle generation installed, this alert is triggered for different reasons. For detailed alert information, refer to GTW_w393_dfHndFault.

Tesla warning code in the Gateway (GTW) module. This alert is set when the passenger front door handle failed. The alert is universal for all generations of door handles but depending on the door handle generation installed, this alert is triggered for different reasons. For detailed alert information, refer to GTW_w393_dfHndFault.

Tesla warning code in the Gateway (GTW) module. This alert is set when the passenger rear door handle failed. The alert is universal for all generations of door handles, but depending on the door handle generation installed, this alert is triggered for different reasons.